Christmas Gnome and Snowman Amigurumi Free Pattern
When publishing works on this
For the Master Class, please indicate the author, Evgeny Mazurenko.
Materials
-Plush yarn Himalaya Dolphin Baby or
analogue.
Overall yarn consumption is less than a hank.
For Snowman, I used colors:
YarnArt Dolce No. 741, Himalaya Dolphin Baby No. 329,
No. 318, No. 311, No. 331
For the Gnome:
Himalaya Dolphin Baby No. 353, No. 329, No. 318, No. 311
YarnArt Dolce No. 761
-Yarn Alize Softy + for the beard Gnome
-YarnArt jeans yarn or children’s novelty
black (for embroidery of eyebrows, arrows)
– Quite a bit of Himalaya plush yarn
Dolphin
Fine white for embroidery of the whites of the eyes
-Yarn Children’s New in green for
twigs and YarnArt Jeans for berries
-Eye eyes on a secure mount 14-16mm
-Dental floss or other strong thread for tightening
and sewing on details
-Hook No. 3.5
-Filler
-Scissors
-Long needle (for tightening)
When using the specified materials and hook numbers 3.5mm size of my toys 22-23cm.
Yarn consumption and size of your toy can differ, depending on your density and knitting style, hook number, packing density toys, as well as from the brand of yarn and its batch.
Abbrevations
CH-chain
SC- single crochet
inc-increase
dec-decrease
SL-ST-slip-stitch
(…) x … repeat the action in parentheses indicated number of times
4DCc1B-4 double crochet with one top
Enjoy your knitting and even loops!
PATTERN
Arms
We knit the handles with plush yarn (colors of your choice).
We knit a sleeve in one color, the sleeves themselves to others.
We knit a finger 4DCc1B in one loop grounds.
To do this, we make a yarn, we stretch out the working thread and knit 2 loops on the hook (on the hook 2 loops remain) .We again yarn over, stretch working thread into the same loop of the base and knit again 2 loops on the hook (on the hook 3 loops remain) Repeat this 2 more times. the hook turns 5 loops. We knit all 5 loops with one eyelet (see video).
We knit a finger:
1) 6 into magic ring
2) (1sc, inc) х3 (9)
3-4) 9sc (2 rows)
5)4DCs1v in one loop of the base, 8sc (9), sl-st
Cut the thread, fix it. Change the color of the yarn to blouse color.
Attach the thread in the center from the inner sides of the sleeves.
We knit the next row for the back loops.
6)9sc (for back loop)
7) Dec, 7sc (8)
8-15) 8sc (8 rows)
Fold the top of the handle in half so that the finger looked forward and to the body, we knit 4sc for both walls.
Cut the thread, fix it.
Body-Head
The body is knitted from bottom to top. The marker passes strictly back center of body and head, if necessary make offset loops.
We begin to knit the snowman with white color, we begin to knit the gnome in any color ( to your taste).
1) 6 into magic ring
2) 6inc (12)
3) (1sc, inc) x6 (18)
4) (2sc, inc) x6 (24)
5) (3sc, inc) x6 (30)
6)2sc, inc, (4sc, inc) х5,2sc (36)
7) (5sc, inc) x6 (42)
8-12) 42sc (5 rows)
13) (5sc, dec) x6 (36), sl-st
Cut the thread, fix it.
Change the color of the yarn to the color of the blouse. row knit for the back loop.
14)36sc (behind the back loop)
15)36sc
16) (4sc, dec) x6 (30)
17-18) 30sc (2 rows)
19) (3sc, dec) x6 (24)
20-21) 24sc (2 rows)
22) (2sc, dec) x6 (18)
In the next row we knit handles.
23) 2sc, 4sc (with the handle), 6sc, 4sc (with second handle), 2sc (18)
We knit hands:
24) (1sc, dec) x6 (12), sl-st
Cut the thread, fix it.
The head starts from the next row.
yarn color for a snowman on white, for a gnome on bodily.
We attach the thread from the back along the center of the back.
25)12inc (24)
26) (3sc, inc) х6 (30)
27)30sc
28)8sc, 3inc, 8sc, 3inc, 8sc (36)
29)8sc, (1sc, inc) x3.8sc, (1sc, inc) x3.8sc (42)
30-32) 42sc (3 rows)
33) 8sc, (1sc, dec) х3,8sc, (1sc, dec) х3,8sc (36)
34)36sc
35) (4sc, dec) x6 (30)
36)30sc
37) (3sc, dec) x6 (24)
38)24sc
Insert the eyes between 33 and 34 row.
between the eyes 8sc (counting along the top 34 row).
Installing the eyes.
We stuff the head. Pay special attention to the neck area (the transition of the body to the head). We shape the cheeks.
39) (2sc, dec) x6 (18)
40) (1sc, dec) x6 (12)
41) 6dec
Pull the hole, hide the thread inside the head.
Shoes
We knit boots with plush yarn (I have black ones).
1) 6ch, from the 2nd from the hook 4sc, 3sc in 1 loop, 3sc, inc (12)
2) Inc, 3sc, 3inc, 3sc, 2inc (18)
3) Inc, 6sc, 3inc, 6sc, 2inc (24)
We cut out an oval from dense plastic or other dense material at hand, according to the shape of our sole.
4)24sc (for back loop)
5)24sc
We insert the insole into the shoe.
6)6sc, (1sc, dec) х4)6sc (20)
7)6sc, 4dec, 6sc (16)
Stuffing boots
8)4sc, 4dec, 4sc (12)
9)6dec
10) Pull the hole,
hide the thread.
Author: Evgeniya Mazurenko
Nose (Snowman)
Hook 2.0mm
We knit the nose of the Snowman with yarn Children’s New
orange.
1) 6 into magic ring
2-3) 6sc (2 rows)
4) (1sc, inc) х3 (9)
5)9sc
6) (2sc, inc) х3 (12)
7-8) 12sc (2 rows), sl-st
Nose (Gnome)
We knit the nose of the Gnome with plush yarn of color heads.
1) 6 into magic ring
2) 6inc (12)
3-4) 12sc (2 rows)
5)6dec, sl-st
Fasten the thread, cut.
Fill the nose.
Ears (Gnome x 2)
We knit ears with plush yarn
head color.
1) 6 into magic ring
2) 6inc (12), sl-st
Fasten the thread, cut.
Eye shaping
Eye shaping:
First and second tightening
We introduce the needle between the 28th and 29th row, focusing
in the center of the eye.
We bring the needle to the lower outer corner of the eye, then
into the lower inner corner of the eye and return to
the original place of entry of the needle, stepping back from it
1 column.
We pull up on both threads, little eye
descends and forms a depression under
We tie the threads together, cut and
hide inside the head.
On the second side, we do the same.
Third tightening
Insert the needle from the back in the center of the neck at the border
color change and output over the head to the bottom
the outer corner of the eye. Then to the lower inner
corner of the eye and return to the original
the place where the needle is inserted, departing from it 1 column.
Then we repeat the same with the second eye.
We tighten the threads, tie, cut.
We make out the eyes
We make out the mouth and eyes:
We embroider a mouth
I use YarnArt yarn to decorate the mouth.
Jeans (red), two strands.
We introduce the needle from the area of the nose and withdraw a little
above the dimple under the cheek, formed
after tightening.
Next, we insert the needle just above the second dimple from the tightening, straighten the thread and bring the needle to the original place of insertion.
Cut the thread, tie it and use a hook to hide it inside the head.
If desired, we embroider the sides of a smile with the same yarn in one thread.
We embroider arrows
Black yarn YarnArt Jeans or Children’s
New (in one thread) we embroider arrows.
You can embroider the whites of the eyes for the gnome.
With white plush yarn (I have Himalaya Dolphin Fine) we embroider squirrels for 1/3 of the eye.
We embroider the eyebrows
We embroider the eyebrows with black yarn YarnArt
Jeans or Children’s Novelty, in one thread.
We embroider eyebrows between 36 and 37 row.
Eyebrow width 3sc, distance between eyebrows 6sc.
Sew on the nose of the Snowman
Sew on the nose:
Sew on the nose and ears to the Gnome
Sew on the nose and ears:
Decorating the beard Gnome
We use yarn to decorate the beard
Soft + white.
We cut the required number of segments
length 18cm (the length and thickness of the beard can
adjust to your taste).
We stick the hook 1 row below the mouth along
center and stretch the folded yarn
twice for the middle.
Then we stretch into the formed loop
the ends of the segment and tighten.
And thus we go through the entire contour
beards (see video).
Beard styling:
Sew on the legs
Sew the legs between 1 and 7 row (2-6
rows) Distance between the legs of the spacecraft.
We make a costume
Belt and sleeve binding
Plush yarn (color of your choice)
we tie (sc) the 13th row of the body and the 5th row of handles for loop.
We knit the shelf and collar
We also knit with soft + white yarn.
We attach the thread in front, in the center of the body, in
the nearest row at the belt.
We do ch and start knitting sc from bottom to top, exactly in the center of the body.
To do this, we introduce a hook under the column,
stretch the thread and knit sc.
Thus, we knit a shelf on
suit to the top.
Next, in a similar way, we knit
collar around the neck, as close to the head as possible.
We tie the blouse:
Cap
1) 6 into magic ring
2) (1sc, inc) х3 (9)
3) 9sc
4) (2sc, inc) х3 (12)
5)12sc
6) (3sc, inc) х3 (15)
7)15sc
8) (4sc, inc) х3 (18)
9)18sc
10) (5sc, inc) х3 (21)
11) 21sc
12) (6sc, inc) х3 (24)
13) 24sc
14) (7sc, inc) х3 (27)
15)27sc
16) (8sc, inc) х3 (30)
17)30sc
18) (4sc, inc) x6 (36)
19)36sc
20) (5sc, inc) x6 (42)
21-25) 42sc (5 rows)
Cut the thread, fix it.
We make the edge strapping (optional).
Cap pompom
1) 6 into magic ring
2) 6inc (12)
3) (1sc, inc) x6 (18)
4-5) 18sc
6) (1sc, dec) x6 (12)
7)6dec, fasten the thread, trim.
Fill the pompon with filler, sew to cap.
Hat
We knit the hat with black plush yarn.
1) 6 into magic ring
2) 6inc (12)
3) (1sc, inc) x6 (18)
4)18sc (for back loop)
5-7) 18sc (3 rows)
8) (4sc, dec) х3 (15)
9)15sc
10) 15inc (30) – behind the back loop
11) 30sc
12) (1sc, inc) 15 (45)
13) 45sc, sl-st
Fasten the thread, cut.
Twigs for decoration
We knit twigs for decorating the cap and cap
yarn Children’s novelty green.
We put on a chain of 21ch, from the 2nd loop from the hook
we knit 5sc.
In the next loop we make sl-st and from it we type
6sc, from the 2nd loop from the hook we knit in
reverse direction 5sc.
And thus we knit to the end of the chain.
The length and number of branches can be any.
We knit from red YarnArt Jeans yarn
berries:
1) 6 into magic ring
2-3) 6sc
Pull the hole, leave the thread for sewing.
