Cute Skunky Amigurumi Free Crochet Pattern
I choose the most beautiful amigurumi animal patterns for you and share them free of charge. You will love this wonderful amigurumi skunky pattern.
MATERIALS
Yarn: “Yarn Art VELOR” (100gr / 170m)
color 843 beige – 0.5 skein
color 842 black – 1.3 skeins
Yarn: “Yarn Art Mink” (50gr / 75m)
color 330 milky – 1 skein
color 346 black – 1.2 skeins
Yarn: “Pekhorka Children’s Novelty” (50gr / 200m)
black color – 10 g for the spout
Yarn: “Alize Forever” (50gr / 300m)
color 298 beige a little for the eyes
color white a little for the eyes
color blue a little for the eyes
color black a little for the eyes
Holofiber filler
Hook No. 1.0, 2.5
False eyelashes
Wire for frame d- 1.2 mm, 1.6 mm
ABBREVATİONS:
CH – Chain
SL-ST – Slip stitch
SC – single crochet
HDC – half double crochet
DC – double crochet
İNC – increase (knit 2 columns in one loop)
DEC – decrease (knit 2 stitches together)
(SC, İNC) * 6 – repeat the combination in brackets 6 times
3 SC in 1 – knit 3 stitches in 1 loop
2 İNC – knit 2 SC in 1 loop 2 times
3 İNC – knit 2 SC in 1 loop 3 times
9DC – 9 double crochets
D2C – double crochet
2DC – double crochet
3D2C – three columns with two crochets
INC-HDC – raise with half double crochets, knit 2 half columns with crochet in 1 loop
(18) – the number in brackets at the end of each row, shows the number of loops in the row
When using these materials, Skunk turns out to be 31 cm in height.
TIPS FROM THE AUTHOR:
Velor is a delicate, soft thread, very pleasant to knit and in a finished product.
For toys, just a godsend. It is easy to knit with velor, the loops are clearly visible.
1) Start knitting with two air loops, tying the required number of columns into the first loop, since when tightening the amigurumi ring, the thread may break, or the villi will not allow the ring to tighten tightly.
2) When decreasing the loops, in order to avoid the formation of holes, we grab the thread by the front walls of the loops.
3) Velor does not tolerate blooming. The villi cling to the posts and do not lend themselves to blooming. Some velors bloom quite easily, but the villi look deformed and ugly. Be sure to use the start of the row marker.
4) It is not necessary to make velor straps and sew on details.
Use a strong thread to match the yarn for this.
5) Thread the velor thread with a blunt needle. Take your time and don’t pull too hard, velor loves a gentle touch.
The toy is knitted in a spiral, without connecting posts and lifting loops.
HEAD
Yarn Art Velor Beige yarn:
1) 3 CH, in the 2nd loop from the hook we knit 6 SC (6)
2) İNC, 3 SC, 2 İNC (9)
3) 2 HDC, 3 SC, 4 HDC (9)
4) 1 HDC, 1 INC-HDC, 1 SC, İNC, 1 SC, (1 HDC, 1 INC-HDC) * 2 (13)
5) 3 HDC, 4 SC, 6 HDC (13)
6) 2 HDC, INC-HDC, 2 SC, İNC, 1 SC, (2 HDC, INC-HDC) * 2 (17)
7) INC-HDC, 3 HDC, 2 SC, İNC, 2 SC, (INC-HDC, 3 HDC) * 2 (21)
8) 5 SC, 6 SL-ST, 10 SC (21) – knit 5 more SC, put the MARKER
9) change the thread to black: (6 SC, İNC) * 3 (24)
10) (3 SC, İNC) * 6 (30)
11) 10 SL-ST, 20 HDC (30)
12) 12 INC-HDC, 18 SC (42)
13) (1 SC, İNC) * 12, 18 SC (54)
14) (8 SC, İNC) * 6 (60)
15-24) 10 rows of 60 SC (60)
25) (8 SC, DEC) * 6 (54)
26) 54 SC (54) – fill with filler
27) (7 SC, DEC) * 6 (48)
28) 48 SC (48)
29) (6 SC, DEC) * 6 (42)
30) (5 SC, DEC) * 6 (36)
31) (4 SC, DEC) * 6 (30)
32) (3 SC, DEC) * 6 (24) – fill with filler
33) (2 SC, DEC) * 6 (18)
34) (1 SC, DEC) * 6 (12)
35) 6 DEC (6) – pull off the hole, fasten the thread, cut and hide.
EYES
Yarn: “Alize Forever” (50gr / 300m)
black color:
1) 4 CH, in the 2nd loop from the hook we knit: İNC, 1 SC, 3 SC in the 1st loop, on the other side 2 SC (8)
2) 2 İNC, 1 SC, 3 İNC, 1 SC, İNC (14)
Change the thread to blue:
3) (İNC, 1 SC) * 2, 1 SC, (İNC, 1 SC) – change the thread to black: (İNC, 1 SC) * 2, 1 SC, İNC (19)
Change the thread to white:
4) (İNC, 2 SC) * 2, 1 SC, (2 SC, İNC) * 2, SL-ST Attach a beige thread: 4 SC, İNC (24)
5) (İNC, 1 SC) * 3, 5 SC, (İNC, 2 SC) * 2, İNC, 6 SC (30)
6) 1 SC, INC-HDC, 7 INC-DC, 2 HDC, 2 SC, SL-ST – fasten the thread, leave the SECOND EYE for sewing, knit in a mirror image:
black thread
1) 4 CH, in the 2nd loop from the hook we knit: İNC, 1 SC, 3 SC in one loop, 2 SC (8)
2) 2 İNC, 1 SC, 3 İNC, 1 SC, İNC (14)
3) change the thread to blue: İNC, 1 SC, İNC, 2 SC, İNC, 1 SC, change the thread to black: (İNC, 1 SC) * 2, 1 SC, İNC (19)
4) white thread: (İNC, 2 SC) * 2, 1 SC, (2 SC, İNC) * 2, SL-ST, connect beige thread: 4 SC, İNC (24)
5) (İNC, 1 SC) * 3, 5 SC, (İNC, 2 SC) * 2, İNC, 6 SC (30)
6) 7 SL-ST, 3 SC, 2 HDC, 1 DC, 7 INC-DC, INC-HDC, 1 SC, SL-ST – leave thread for sewing
Embroider the glare on the pupils with white thread.
Embroider the edging of the pupil with black thread.
Sew the eyes to the head. Glue eyelashes to your eyes.
We embroider the eyebrows between the 16th and 17th rows, eyebrow length = 4 loops, 10 loops between the eyebrows.
NOSE
Yarn: “Pekhorka Children’s Novelty” (50gr / 200m)
black color:
1) İNTO MAGİC RİNG 6 SC (6)
2) 6 İNC (12)
3-4) 12 SC (12)
5) 1 SC, 2 DC with one point, 1 SC, SL-ST – leave thread for sewing.
Sew on the nose
EARS (2 parts)
Yarn: “Yarn Art VELOR” (100gr / 170m)
color 842 black
1) 3 CH, in the 2nd loop from the hook 6 SC (6)
2) 6 İNC (12)
3) (1 SC, İNC) * 6 (18)
4) (2 SC, İNC) * 6 (24)
5-6) 24 SC (24)
7) (2 SC, DEC) * 6 (18)
8) 18 SC (18)
Connect the edges of the ear by knitting on both sides: 9 SC (9)
Connect the edges of the SL-ST lugs.
We knit the second ear in the same way.
We fasten the ears between the 20th and 24th rows, the distance between the ears from the beginning (corner) of the ear to the beginning (corner) of the other ear = 30 loops.
Sew on the lower part of the ear:
3 rows long, inside the ear (in the middle) we attach it to the head with one stitch so that it does not stick out much.
MOUTH
Yarn: “Yarn Art VELOR” (100gr / 170m)
color 843 beige:
1) 3 CH, in the 2nd loop from the hook: 6 SC (6)
2) 6 İNC (12)
3) (1 SC, İNC) * 6 (18)
4-5) 18 SC (18)
6) we knit not a full row: 3 SC, SL-ST – to align the mouth
The inside of the mouth is tinted red.
Sew on the mouth.
HEAD COVER
Yarn: “Yarn Art Mink” (50gr / 75m)
color 330 milky
We knit in rotary rows:
1) cast on 4 CH, in the 2nd loop from the hook we knit: 3 SC (3)
2-5) 4 rows knit 3 SC each (3)
6) 1 SC, İNC, 1 SC (4)
7-16) 10 rows knit 4 SC each (4)
17) 1 SC, İNC, 2 SC (5)
18-22) 5 rows knit 5 SC each (5)
23) İNC, 1 SC, İNC, 1 SC, İNC (8)
24) İNC, 2 SC, 2 İNC, 2 SC, İNC (12)
25) İNC, 10 SC, İNC (14)
26) INC-HDC, 12 SC, INC-HDC (16)
27) INC-HDC, 14 SC, INC-HDC (18)
28) INC-HDC, 16 HDC, INC-HDC (20)
29) INC-HDC, 18 HDC, INC-HDC (22)
30) INC-HDC, 20 HDC, INC-HDC (24)
31) INC-HDC, 22 HDC, INC-HDC (26)
32-36) 5 rows knit 26 HDC each (26)
37) DEC-HDC, 24 HDC, DEC-HDC (24)
38) DEC-HDC, 22 HDC, DEC-HDC (22)
39-40) 22 HDC (22)
41) 10 HDC, 2 INC-HDC, 10 HDC (24)
42) 11 HDC, 2 INC-HDC, 11 HDC (26)
43) 12 HDC, 2 INC-HDC, 12 HDC (28)
44) 12 HDC, 2 DEC-HDC, 12 HDC (26)
45) 11 HDC, 2 DEC-HDC, 11 HDC (24)
46) (2 HDC, DEC-HDC) * 6 (18)
47) (1 HDC, DEC-HDC) * 6 (12)
48) 12 HDC (12)
49) DEC-HDC, 18 HDC, DEC-HDC (10)
50) DEC-HDC, 6 HDC, DEC-HDC (8)
51-52) 8 HDC (8)
53) DEC, 4 SC, DEC (6)
54-62) 9 rows knit 6 SC each (6)
Fasten, cut and hide the thread.
Trying on the head pad, if everything suits you, then sew it on!
BODY
Yarn: “Yarn Art VELOR” (100gr / 170m)
color 842 black
1) 3 CH, in the 2nd loop from the hook: 6 SC (6)
2) 6 İNC (12)
3) (1 SC, İNC) * 6 (18)
4) (2 SC, İNC) * 6 (24)
5) (3 SC, İNC) * 6 (30)
6) (4 SC, İNC) * 6 (36)
7) (5 SC, İNC) * 6 (42)
8) (6 SC, İNC) * 6 (48)
9) (7 SC, İNC) * 6 (54)
10) 54 SC (54)
11) (8 SC, İNC) * 6 (60)
12) (9 SC, İNC) * 6 (66)
13-20) 8 rows knit 66 SC each (66)
21) (9 SC, DEC) * 6 (60)
22) (8 SC, DEC) * 6 (54)
23) (7 SC, DEC) * 6 (48)
24) (6 SC, DEC) * 6 (42)
25-26) 42 SC (42)
27) (5 SC, DEC) * 6 (36)
28) 36 SC (36) – fill with filler
29) (4 SC, DEC) * 6 (30)
30) 30 SC (30)
31) (3 SC, DEC) * 6 (24)
32) (2 SC, DEC) * 6 (18)
33-34) 18 SC (18) – fasten, cut and hide the thread
ANIMAL COVER
Yarn: “Yarn Art VELOR” (100gr / 170m)
color 843 beige
We knit in rotary rows:
1) 11 CH in 2nd loop from hook: 10 SC (10)
2) CH, İNC, 8 SC, İNC (12)
3) CH, İNC, 10 SC, İNC (14)
4) CH, İNC, 12 SC, İNC (16)
5) CH, İNC, 14 SC, İNC (18)
6) CH, İNC, 16 SC, İNC (20)
7-10) 4 rows of 20 SC (20)
11) CH, DEC, 16 SC, DEC (18)
12) CH, 18 SC, (18)
13) CH, DEC, 14 SC, DEC (16)
14) CH, 16 SC (16)
15) CH, DEC, 12 SC, DEC (14)
16) CH, 14 SC (14)
17) CH, DEC, 10 SC, DEC (12)
18) CH, 12 SC (12)
19) CH, DEC, 8 SC, DEC (10)
20) CH, 10 SC (10)
21) CH, DEC, 6 SC, DEC (8)
22) CH, 8 SC (8)
23) CH, DEC, 4 SC, DEC (6)
24) CH, 6 SC (6)
25) CH, DEC, 2 SC, DEC (4)
26) CH, 4 SC (4)
27) CH, 4 SC (4)
We tie the part on all sides of the SC.
Fasten, cut and hide the thread.
We measure the circumference of the body in the wide part of the part (I have 34 cm), mark the middle of the front with a needle, measure 17 cm, mark the middle of the back with a needle.
Fold the overlay in half, find the middle and apply it to the middle of the front, evenly distributing it – we sew the part.
FEET HANDLE (2 parts)
Yarn: “Yarn Art VELOR” (100gr / 170m)
color 842 black
1) 3CH, in a loop from the hook we knit: 6 SC (6)
2) (1 SC, İNC) * 3 (9)
3-4) 9 SC (9)
5) (1 SC, DEC) * 3 (6)
6) 3 İNC, 3 SC (9)
7) 9 SC (9)
8) (2 SC, İNC) * 3 (12)
9) 6 İNC, 6 SC (18)
10-12) 18 SC (18)
13) (2 SC, DEC) * 3, (1 SC, İNC) * 3 (18)
14-20) 7 rows of 18 SC (18)
21) (1 SC, DEC) * 6 (12) – insert the frame wire d – 1.2 mm – fill it with filler
22) 6 DEC (6) – pull the hole, fasten the thread, cut and hide
We knit the second paw in the same way.
We give the shape to the foot, bend it.
LEGS LEGS (2 parts)
Yarn: “Yarn Art VELOR” (100gr / 170m)
color 842 black
1) cast on 6 CH, in the 2nd loop from the hook we knit: İNC, 3 SC, in the last loop 3 SC, 4 SC (12)
2) 2 İNC, 3 SC, 3 İNC, 3 SC, İNC (18)
3) (1 SC, İNC) * 2, 3 SC, (1 SC, İNC) * 3, 3 SC, (1 SC, İNC) * 1 (24)
4) (2 SC, İNC) * 2, 3 SC, 2 SC, INC-HDC, (2 HDC, 2 INC-HDC) * 2, 3 SC, (2 SC, İNC) * 1 (30)
5) for the back half-loops we knit 30 SC (30)
We cut out the insoles from thick cardboard or plastic.
6) 30 SC (30) – Insert the insole into the foot
7) (2 SC, DEC) * 2, 3 SC, 6 DEC, 3 SC, (2 SC, DEC) * 1 (21)
8) (1 SC, DEC) * 2, 3 SC, 3 DEC, 3 SC, (1 SC, DEC) * 1 (15)
9) (3 SC, DEC) * 3 (12)
10) 12 SC (12) – Stuff the foot
11) (1 SC, İNC) * 6 (18)
12) (2 SC, İNC) * 6 (24)
13) 24 SC (24)
14) (3 SC, İNC) * 6 (30)
15) (4 SC, İNC) * 6 (36)
16) (5 SC, İNC) * 6 (42)
17) (6 SC, İNC) * 6 (48)
18-20) 3 rows of 48 SC (48)
21) (6 SC, DEC) * 6 (42)
22) (5 SC, DEC) * 6 (36)
23) (4 SC, DEC) * 6 (30)
24) (3 SC, DEC) * 6 (24)
25) (2 SC, DEC) * 6 (18)
We make a frame for the leg from wire d – 1.6 mm, insert it inside the leg and fill it with filler.
26) (1 SC, DEC) * 6 (12)
27) 6 DEC (6)
Pull the hole, fasten the thread, cut and hide.
BACK PAD
Yarn Art Mink Yarn (50gr / 75m)
color 346 – black
We knit in rotary rows
Dial with black thread:
1) 9 CH, from the 2nd loop from the hook we knit 8 SC (8)
2) CH, İNC, 6 SC, İNC (10)
3) CH, İNC, 8 SC, İNC (12)
4) CH, İNC, 10 SC, İNC (14)
5) CH, İNC, 12 SC, İNC (16)
6) CH, 16 SC (16)
7) CH, İNC, 14 SC, İNC (18)
8-12) 5 rows of 18 SC (18)
13) CH, DEC, 14 SC, DEC (16)
14) CH, 16 SC (16)
15) CH, DEC, 12 SC, DEC (14)
16) CH, 14 SC (14)
17) CH, DEC, 10 SC, DEC (12)
18) CH, 12 SC (12)
19) CH, DEC, 8 SC, DEC (10)
20) CH, 10 SC (10)
21) CH, DEC, 6 SC, DEC (8)
22) CH, 8 SC (8)
23) CH, DEC, 4 SC, DEC (6)
24) CH, 6 SC (6)
25) CH, DEC, 2 SC, DEC (4)
26) CH, 4 SC (4)
27-32) 6 rows of 4 SC (4)
33) CH, 2 DEC (2)
We attach a thread of milky color “Mink”, we tie the detail:
1) 2 CH lift, (6 DC, INC-DC) * 2, (4 DC, INC-DC) * 3, 8 DC, (INC-DC, 4 DC) * 3, (INC-DC,
6 DC) * 2 (76)
2) CH, 10 SC, 16 DC, INC-DC, 6 DC, 10 HDC, INC-DC, 6 DC, 16 DC, 10 SC, SL-ST (78)
Fasten, cut and hide the thread.
Fold the part in half, mark the middle, attach it to the middle of the back, distribute the part evenly over the back, fasten with pins, sew.
CONNECTING ALL DETAILS
1) We attach the head to the neck with pins, if everything is fine, sew it in half, add filler to the neck, sew it to the end.
2) We fasten the Paws-Handles with a thread fastening, departing from the edge of the neck 3-4 rows.
3) We fasten the Legs-Feet with thread fastening in the 15th row from the beginning of knitting of the body.
TAIL
Black yarn “Mink”.
We knit in rotary rows:
1) 3 CH, in 1st loop 3 DC (3)
2) 2 CH, INC-DC, 1 DC, INC-DC (5)
3) 2 CH, INC-DC, 3 DC, INC-DC (7)
4) 2 CH, INC-DC, 5 DC, INC-DC (9)
5) 2 CH, INC-DC, 7 DC, INC-DC (11)
6) 2 CH, INC-DC, 9 DC, INC-DC (13)
7) 2 CH, INC-DC, 11 DC, INC-DC (15)
8) 2 CH, INC-DC, 13 DC, INC-DC (17)
9) 2 CH, INC-DC, 15 DC, INC-DC (19)
10) 2 CH, INC-DC, 17 DC, INC-DC (21)
11-22) 12 rows of 21 DC (21)
23) 2 CH, DEC-DC, 17 DC, DEC-DC (19)
24) 2 CH, DEC-DC, 15 DC, DEC-DC (17)
25) 2 CH, DEC-DC, 13 DC, DEC-DC (15)
26) 2 CH, DEC-DC, 11 DC, DEC-DC (13)
27) 2 CH, DEC-DC, 9 DC, DEC-DC (11)
28) 2 CH, DEC-DC, 7 DC, DEC-DC (9)
29) 2 CH, DEC-DC, 5 DC, DEC-DC (7)
30) 2 CH, DEC-DC, 3 DC, DEC-DC (5)
31) 2 CH, DEC-DC, 1 DC, DEC-DC (3)
32) 2 CH, DEC of 3 DC (1)
Change the thread to the milky color “Mink”.
We tie the tail on all sides:
1) 2 CH, INC-DC, 16 DC, 2 INC-DC, 16 DC, 2 INC-DC, 20 DC, 3 DC in 1 loop, 20 DC, 2 İNC-DC, 16 DC, 2 INC-DC, 16 DC, INC-DC (127)
2) 2 CH, 16 DC, 1 D2C, (2 D2C, INC-D2C) * 7, 1 D2C, 10 DC, 14 SC, 3 SC in 1 loop, 14 SC, 10 DC, 1 D2C, (2 D2C, INC-D2C) * 7, 1 D2C, 16 DC (143)
Change the thread to black “Mink”:
3) 2 CH, 2 INC-DC, (3 DC, INC-DC) * 8, (3 D2C, INC-D2C) * 8, 5 D2C, 3 D2C in 1 loop, (3 D2C, INC-D2C) * 8, 5 D2C, (3 D2C, INC-D2C) * 8, 2 INC-DC (181)
Fasten, cut and hide the thread.
We knit the second part in the same way.
From wire d – 1.6 mm, make a frame for the tail.
Fasten the frame with stitches to the upper part of the tail in several places so that the frame does not ride along the tail and it is more convenient to bend the tail in the desired position.
We connect the details of the tail together (I sewed it with a black thread “Mink”), leave a hole at the bottom of the tail and stuff the tail not tightly, only for volume and shaping, evenly distributing the filler over the entire tail.
Sew the tail to the body, give it a shape.
OUR SKUNKY SKUNKY IS READY!
