Doll Tonti and Yumi Amigurumi Free Pattern

Amigurumi cute doll patterns are on this site for free. I shared with you the amigurumi doll tonti and yumi pattern in this article. 

MATERIALS:  

* Ropes: 100 gr./250 m. Himalaya Delusc Bamboo Skin Color 124-04  

(about 1.5 ropes going)  

(In this delicacy Snowball Organicdec is also prefer Gazzal Baby Cotton threads You can.)  

* Crochet: 2 mm. * Eyes: 15 mm. * 30 mm joint apparatus for legs 25 mm joint apparatus for arms  

* 10 cm to keep the neck upright. pipe in length also electrical wire  

* Sewing needle and fixing needle  

* 8 cm long needle for shaping face  

* Black domino thread for embroideries  

* Bead fiber  

Abbreviations:  

sc: single crochet  

inc: increase  

w: knit 3 single crochet into the same bowknot  

dec: decrease  

*: repeat  

HDC: half double crochet  

DC: double crochet  

sl-st: slip stitch  

ch: chain  

BLO: knitting from the back lobe of the loop  

FLO: knitting from the front lobe of the loop  

NOTE: Unless otherwise stated, it is spiral continue by knitting. While knitting order loop setting so as not to confuse You can use. Loop at the end of each row writes the number. 

!!! Due to the difference in hand tightness, some places such as knee cap protrusion in the recipe there may be slippage. If there is a slippage according to the baby you knit I recommend you to adjust. Knee protrusion, cheek protrusion, joint spaces It was written separately in the knitted rows. Visuals about adjusting for yourself will help you. You can make adjustments using pictures. 

HEAD  

1. Magic ring 6sc  

2.6inc = 12sc  

3. (sc, inc) * 6 = 18sc  

4. (2sc, inc) * 6 = 24sc  

5. (3sc, inc) * 6 = 30sc  

6. (4sc, inc) * 6 = 36sc  

7. (5sc, inc) * 6 = 42sc  

8. (6sc, inc) * 6 = 48sc  

9. (7sc, inc) * 6 = 54sc  

10 (8sc, İnc) * 6 = 60sc  

11 (9SC, İnc) * 6 = 66sc  

12 (10SC, İnc) * 6 = 72sc  

13 (11sc, İnc) * 6 = 78sc  

14 (12sc, İnc) * 6 = 84sc  

15-24 (10 rows) = 84sc  

25 (12sc, dec) * 6 = 78sc  

26-30 (5 rows) = 78sc  

31.28sc, skip 2h pull off (for eye), 13sc, skip 2h pull off (for eye), 33sc = 78sc  

32. = 78sc  

33. 18sc, (sc, inc) * 5 (cheek overhang), 17sc, (sc, inc) * 5 (cheek overhang), 23sc = 88sc  

34-38 (5 rows) = 88sc  

39.22sc, (sc, dec) * 4, 18sc, (sc, dec) * 4, 24sc = 80sc  

40. 19sc, 6dec, 18sc, 6dec, 19sc = 68sc  

We attach our eyes to the eye sockets. 41. 10sc, (sc, dec) * 5, 17sc, (sc, dec) * 5, 11sc = 58sc  

42. 10sc, 6dec, 15sc, 6dec, 9sc = 46sc  

43. (4sc, dec) * 3, 3sc, 6inc, 3sc, (dec, 4sc) * 2, dec, 2sc = 46sc  

We begin to fill the head tightly with fiber. 

44. = 46sc  

45. (4sc, dec) * 2, 20sc, (4sc, dec) * 2, 2sc = 42sc  

46. (5sc, dec) * 2, 8dec, (dec, 4sc) * 2 = 30sc  

47. 6sc, 4dec, 6sc, 4dec, 2sc = 22sc  

48. = 22sc Cut the rope. Fill the head tightly. * Fill and shape the cheek ridges especially tightly. Note: 34-35. We process the nose on the desks as in the picture.  

* After filling the head with fiber, enter from both sides of the eyes with a long needle, eye socket  

We’re doing. You can use the youtube video in the link I will write for this; 

* when we want to make a man’s nose  

33-34 as in the picture. On desks We process 7 loops wide  

When we want to make a girl  

33-34 as in the picture. On desks We are processing 5 loops wide.  

* We process the lashes, eyebrows and mouth as in the picture. With needle or marker before machining It will be easier if you set and process the borders with a pencil.  

EAR (2 pieces)  

1.4 ch checks  

2. (from 2nd ch) w, sc, w, sc (we attach the marker here) = 8sc  

3. 3inc, sc, 3inc, sc = 14sc  

4. (sc, inc) * 3, sc, (sc, inc) * 3, sc = 20sc  

5. = 20sc  

6. Knit another 5sc and cut the thread.  

* 26-33 to 10 stitches from the edge of the eye. We sew our ears on the rows.  

You can determine the location with a marker pen, either with a needle or as I did. You can obtain an oval image by sewing the ends of the ears with a loop inward. 

RIGHT HAND  

Knit the fingers according to the order in which I write.  

Thumb = Magic ring 7sc, finish 3 rows 7sc.  

Index Finger = Magic ring 6sc, finish 4 rows 6sc.  

Middle Finger = Magic ring 6sc, finish 5 rows 6sc. 

Ring Finger = Magic ring 6sc, finish 4 rows 6sc.  

Little Finger = Magic ring 6sc, 3 rows of 6sc, we continue without cutting the rope.  

Note: You can knit and combine the fingers separately or do what I do You can knit with chain method like.  

We move on to join the fingers:  

1. (Little finger) 2sc, (ring finger) 3sc, (middle finger) 3sc, (index finger) 6sc, (middle finger) 3sc, (ring finger) 3sc, (pinky finger) 4sc = 24sc we attach the marker here.  

2. = 24sc  

3. (3sc, inc) * 6 = 30sc  

4. = 30sc  

(We combine the thumb in the 5th and 6th rows.)  

5. Hand 11sc, (finger and hand together) 3sc, hand 16sc = 30sc  

6. 11sc from hand, 4sc from finger, 16sc from hand = 31sc  

7.29sc, dec = 30sc  

8.15dec = 15sc  

Fill the hand with fiber.  

9. 15inc = 30sc  

10. = 30sc  

11. (13sc, dec) * 2 = 28sc  

12-20 (9 rows) = 28sc  

little finger  

Ring finger  

Middle finger  

Pointing finger  

Thumb  

21. (sc, dec) * 9, sc = 19sc  

22. (sc, inc) * 9, sc = 28sc  

23. (13sc, inc) * 2 = 30sc  

24-29 (6 rows) = 30sc  

30. 11sc, 2zn pull 2 ch skip (joint slot), 17sc = 30sc  

31. = 30sc  

32. (3sc, dec) * 6 = 24sc  

We attach the joint to its socket. 33. (2sc, dec) * 6 = 18sc  

34. (sc, dec) * 6 = 12sc  

35.6dec = 6sc.  

LEFT HAND  

Knit the fingers according to the order in which I write.  

Thumb = Magic ring 7sc, finish 3 rows 7sc.  

Index Finger = Magic ring 6sc, finish 4 rows 6sc.  

Middle Finger = Magic ring 6sc, finish 5 rows 6sc. 

Ring Finger = Magic ring 6sc, finish 4 rows 6sc.  

Little Finger = Magic ring 6sc, 3 rows of 6sc, we continue without cutting the rope.  

Note: You can knit and combine the fingers separately or do what I do You can knit with chain method like. We move on to join the fingers:  

1. (Little finger) 2sc, (ring finger) 3sc, (middle finger) 3sc, (index finger) 6sc, (middle finger) 3sc, (ring finger) 3sc, (pinky finger) 4sc = 24sc we attach the marker here.  

2. = 24sc  

3. (3sc, inc) * 6 = 30sc  

4. = 30sc  

(We combine the thumb in the 5th and 6th rows.)  

5. Hand 14sc, (finger and hand together) 3sc, 13sc = 30sc  

6. 14sc from hand, 4sc from finger, 13sc from hand = 31sc  

7.29sc, dec = 30sc  

8.15dec = 15sc  

Fill the hand with fiber.  

9. 15inc = 30sc  

10. = 30sc  

11. (13sc, dec) * 2 = 28sc  

12-20 (9 rows) = 28sc  

21. (sc, dec) * 9, sc = 19sc  

22. (sc, inc) * 9, sc = 28sc  

23. (13sc, inc) * 2 = 30sc  

24-29 (6 rows) = 30sc  

30.27sc, 2 ch skip 2 ch skip (joint slot), sc = 30sc  

31. = 30sc  

32. (3sc, dec) * 6 = 24sc  

We attach the joint to its socket.  

33. (2sc, dec) * 6 = 18sc  

34. (sc, dec) * 6 = 12sc  

35.6dec = 6sc.  

RIGHT FOOT  

Knit the fingers according to the order in which I write.  

Thumb = Magic ring 8sc, finish 3 rows 8sc.  

Pointing Finger = Magic ring 7sc, finish 3 rows 7sc.  

Middle Finger = Magic ring 7sc, finish 3 rows 7sc. 

Ring Finger = Magic ring 6sc, finish 3 rows 6sc.  

Little Finger = Magic ring 6sc, finish 2 rows 6sc. 

We move on to join the fingers:  

1. (Little Finger) 2sc, (ring finger) 3sc, (middle finger) 4sc, (index finger) 4sc, (thumb) 8sc, (index finger) 3sc, (middle finger) 3sc, (ring finger) 3sc, (pinky finger) 4sc = 34sc  

2. = 34sc  

3. = 34sc  

4. (15sc, dec) * 2 = 32sc  

5-11 (7 rows) = 32sc  

12. 19sc, 10 ch check 12 ch skip (for heel protrusion), sc = 30sc  

13. 19sc, from 10sc ch, sc = 30sc  

14. (3sc, dec) * 6 = 24sc  

15. (2sc, dec) * 6 = 18sc  

16. (sc, dec) * 6 = 12sc  

17. 6dec = 6sc pick the thread with a needle. We have made the heel part right now.  

Top finger  

Now we will start making the leg part. * We hold the foot with the fingers facing us, we attach the rope from the right side.  

1. 12sc from the front, 10sc from the back = 22sc  

2. (10sc, inc) * 2 = 24sc  

3. (3sc, inc) * 6 = 30sc  

4-13 (10 rows) = 30sc  

14. 8sc, 5inc (knee protrusion), 9sc, 4dec = 31sc  

15. = 31sc  

16. = 31sc  

17. 8sc, 6dec, 7sc, 4inc = 29sc  

18. 25sc, inc, 3sc = 30sc  

19. = 30sc  

20. (4sc, inc) * 6 = 36sc  

21. 2sc, inc, (5sc, inc) * 5, 3sc = 42sc  

22-29 (8 rows) = 42sc  

30.44sc, 2ch skip 2ch skip (joint slot), 36sc = 42sc  

31. = 42sc  

32. (5sc, dec) * 6 = 36sc  

33. (4sc, dec) * 6 = 30sc  

We attach the joint  

34. (3sc, dec) * 6 = 24sc  

35. (2sc, dec) * 6 = 18sc  

36. (sc, dec) * 6 = 12sc  

37.6dec = 6sc. * Decreases behind the knee cap as in the picture should be exactly right.  

* The enhancements in front of the knee cap are as forward as in the picture. denkgel should. If 1-2 loops slip you may not care, but if there is a noticeable shift is due to hand difference. You can fix it for yourself.  

LEFT FOOT  

Knit the fingers according to the order in which I write.  

Thumb = Magic ring 8sc, finish 3 rows 8sc.  

Pointing Finger = Magic ring 7sc, finish 3 rows 7sc.  

Middle Finger = Magic ring 7sc, finish 3 rows 7sc. 

Ring Finger = Magic ring 6sc, finish 3 rows 6sc.  

Little Finger = Magic ring 6sc, finish 2 rows 6sc. We move on to join the fingers:  

1. (Little Finger) 2sc, (ring finger) 3sc, (middle finger) 3sc, (index finger) 3sc, (thumb) 8sc, (index finger) 4sc, (middle finger) 4sc, (ring finger) 3sc, (little finger) 4sc = 34sc  

2. = 34sc  

3. = 34sc  

4. (15sc, dec) * 2 = 32sc  

5-11 (7 rows) = 32sc  

12. 3sc, 10 ch check skip 12 ch (for heel protrusion), 17sc = 30sc  

13. 3sc, from 10sc ch, 17sc = 30sc  

14. (3sc, dec) * 6 = 24sc  

15. (2sc, dec) * 6 = 18sc  

16. (sc, dec) * 6 = 12sc  

17. 6dec = 6sc pick the thread with a needle. We have made the heel part right now. Now we will start making the leg part. The toes will look at us We attach the rope from the right side. 

1. 12sc from the front, 10sc from the back = 22sc  

2. (10sc, inc) * 2 = 24sc  

3. (3sc, inc) * 6 = 30sc  

4-13 (10 rows) = 30sc  

14. 8sc, 5inc (knee protrusion), 9sc, 4dec = 31sc  

15. = 31sc  

16. = 31sc  

17. 8sc, 6dec, 7sc, 4inc = 29sc  

18. 25sc, inc, 3sc = 30sc  

19. = 30sc  

20. (4sc, inc) * 6 = 36sc  

21. 2sc, inc, (5sc, inc) * 5, 3sc = 42sc  

22-29 (8 rows) = 42sc  

30.26sc, 2ch skip 2ch skip (joint slot), 14sc = 42sc  

31. = 42sc  

32. (5sc, dec) * 6 = 36sc  

33. (4sc, dec) * 6 = 30sc  

We attach the joint  

34. (3sc, dec) * 6 = 24sc  

35. (2sc, dec) * 6 = 18sc  

36. (sc, dec) * 6 = 12sc  

37.6dec = 6sc.  

We plug the rope from here little finger Sparrow finger 

BODY  

1. Magic ring 6sc  

2.6inc = 12sc  

3. (sc, inc) * 6 = 18sc  

4. sc, inc, (2sc, inc) * 5, sc = 24sc  

5. (3sc, inc) * 6 = 30sc  

6.2sc, inc, (4sc, inc) * 5, 2sc = 36sc  

7. (5sc, inc) * 6 = 42sc  

8. 3sc, inc, (6sc, inc) * 5.3sc = 48sc  

9. (7sc, inc) * 6 = 54sc  

10.4sc, Inc., (8sc, Inc.) * 5,4sc = 60sc  

11. (9sc, inc) * 6 = 66sc  

12. 5sc, inc, 8sc, 2zn pull 2 ch skip (joint slot), inc, (10sc, inc) * 2, 6sc, 2 ch check 2 ch skip (joint slot), 2sc, inc, 10sc, inc, 5sc = 72sc  

13. (11sc, inc) * 6 = 78sc  

14-21 (8 rows) = 78sc  

* You can attach the legs you knit into the joint socket (our starting point on the back of the body). Then fill it tightly with the fiber.  

22.36sc, 2dec, 38sc = 76sc  

Right foot left foot  

* The body is finished 22-23. Belly hole where we do 2dec-2inc between rows we will do.  

23. (2sc, dec) * 3, 25sc, 2inc, 25sc, (dec, 2sc) * 3 = 72sc  

24. (4sc, dec) * 2, 48sc, (dec, 4sc) * 2 = 68sc  

25. = 68sc  

26.16sc, dec, 32sc, dec, 16sc = 66sc  

27. (9sc, dec) * 6 = 60sc  

28. 14sc, (2sc, dec) * 8, 14sc = 52sc  

29-32 (4 rows) = 52sc  

33. 13sc, (5sc, dec) * 4, 11sc = 48sc  

34-40 (7 rows) = 48sc  

41. 14sc, 2 ch check 2 ch skip (joint slot), 22sc, 2 ch check 2 ch skip (joint slot), 8sc = 48sc  

42. = 48sc  

43. = 48sc  

44. (6sc, dec) * 6 = 42sc  

45. = 42sc  

* You can attach the arms you knit to the joint slots. Then with fiber fill tightly.  

46. (5sc, dec) * 6 = 36sc  

47. (4sc, dec) * 6 = 30sc  

48. (3sc, dec) * 6 = 24sc  

49. (10sc, dec) * 2 = 22sc  

50. = sew long and cut the thread to sew 22 sc.  

After completely filling and finishing the body to keep the legs close to the trunk We apply the process. I showed in the pictures we proceed by following the stages.  

* A close attachment from the back of the right leg we stick the needle from the ground. Opposite We are subtracting by.  

** We stick the needle in one or two loops from the distance. We take it out from the front.  

* Again, we stick two loops from a distance and remove them from the opposite side.  

* We insert the needle from two stitches apart and remove it from the back of the left leg.  

* We take the needle off the rope. We pull the two ropes firmly on the right and left of the leg. Two  

We pull the thread through a hole in the back of the body, as in the picture. Hanging tight again we connect and fix. We hide the ropes.  

* We make the belly button with rope.  

* You can use a pipe like the picture to keep your head upright. Finally freaking out we sew to the body. Your baby is complete. If you wish, I have prepared a different You can enrich with clothing and accessories recipes in concepts.  

FROG CONCEPT  

CLOTHING (hat-shirt-cloth) RECIPE  

NOTE: Unless otherwise stated, it is spiral continue by knitting. While knitting order loop setting so as not to confuse You can use. Loop at the end of each row writes the number.  

MATERIALS:  

* Ropes: 50 gr./125 m. Kartopu Organica 494 (Light Green)  

Catania 0205 (Green)  

Snowball Organica Black  

Snowball Organica White  

* If you wish instead of green in Catania Snowball  

You can also use Organica 442 green. * Crochet: 2 mm. * Sewing needle and fixing needle  

Note: When knitting, ignore the color of thread used in the pictures. in Title  

Knit according to the rope colors written. The pictures are representative pictures for illustrative purposes. 

HAT 

(green Catania 0205)  

1. Magic ring 6sc  

2.6inc = 12sc  

3. (sc, inc) * 6 = 18sc  

4. sc, inc, (2sc, inc) * 5, sc = 24sc  

5. (3sc, inc) * 6 = 30sc  

6.2sc, inc, (4sc, inc) * 5, 2sc = 36sc  

7. (5sc, inc) * 6 = 42sc  

8. 3sc, inc, (6sc, inc) * 5.3sc = 48sc  

9. (7sc, inc) * 6 = 54sc  

10.4sc, inc, (8sc, inc) * 5.4sc = 60sc  

11. (9sc, inc) * 6 = 66sc  

12.5sc, inc, (10sc, inc) * 5,5sc = 72sc  

13. (11sc, inc) * 6 = 78sc  

14.6sc, inc, (12sc, inc) * 5,6sc = 84sc  

15. (13sc, inc) * 6 = 90sc  

16-27 (12 rows) = Continue without breaking the 90sc thread.  

Now we move on to making the side bands of the hat.  

1. Back to 7sc (we put the marker here.)  

2. Skip the first hole, turn 6sc.  

3. Skip the first hole 5sc.  

Skip the first hole  

5-26 (22 rows) = 4sc (we knit by rotating each row)  

27. Skip the first hole turn 3sc  

28. Skip the first hole turn 2sc  

29. Skip the first hole, cut the sc thread.  

We make the 2nd tape. From the place where we put the marker, rope to the 29th hole  

We are installing.  

1. Back to 7sc  

2. Skip the first hole, turn 6sc.  

3. Skip the first hole 5sc.  

Skip the first hole  

5-26 (22 rows) = 4sc (we knit by rotating each row)  

27. Skip the first hole turn 3sc  

28. Skip the first hole turn 2sc  

29. Skip the first hole sc (we continue without breaking the rope of the hat and tapes we surround it with single crochet.)  

Note: When our hat is finished, the front separation of the hat will be shorter than the rear separation.  

we will place the eyes and nose. Optionally sl-st the front of the hat  

You can do. 

EYES  

Eyelid (green Catania 0205)  

1. Magic ring 6sc  

2.6inc = 12sc  

3. (sc, inc) * 6 = 18sc  

4. (2sc, inc) * 6 = 24sc  

5. (3sc, inc) * 6 = 30sc  

6. (4sc, inc) * 6 = 36sc  

7-12 (6 rows) = 36sc  

Note: 11-15 on both sides of the hat. on the rows as the picture on the eyelids  

We plant.  

Eyeball (with white)  

1. Magic ring 6sc  

2.6inc = 12sc  

3. (sc, inc) * 6 = 18sc  

4. (2sc, inc) * 6 = 24sc  

5. (3sc, inc) * 6 = 30sc  

6-11 (6 rows) = 30sc  

12. (3sc, dec) * 6 = 24sc  

13. (2sc, dec) * 6 = 18sc  

14. (sc, dec) * 6 = 12sc  

15. 6dec = 6sc  

Eye Doll (with black)  

1. Magic ring 5sc  

2.5inc = 10sc  

3. (sc, inc) * 5 = 15sc  

4. (2sc, inc) * 5 = 20sc  

Note: We treat the pupil with a white thread as in the picture and  

We are sewing it on the circle. * We place the eyeball into the eyelid. Parts together not steep. So you can roll the eyeball into the eyelid as we want we can turn it to look in different directions  

T-SHIRT (with white)  

(*): HDC, 1 ch check, HDC into the same hole  

“(*)” Explanation in red where you can see this sign  

We apply. We are increasing this process. Note: Increments in the previous row by pulling the chain into the holes we created we will do it by sinking.  

1. 44 ch checks  

2. Starting from 3rd ch 5 HDC, (*), 10 HDC, (*), 6 HDC, (*), 10 HDC, (*), 7 HDC = 46 turn  

3.check 2 ch, 7 HDC, (*), 11 HDC, (*), 7 HDC, (*), 11 HDC, (*), 6 HDC = 50 turns  

4.2 checks, 6 HDC, (*), 12 HDC, (*), 8 HDC, (*), 12 HDC, (*), 8 HDC = 54 turns  

5. 2 ch checks, 8 HDC, (*), 13 HDC, (*), 9 HDC, (*), 13 HDC, (*), 7 HDC = 58 turns  

6. 2 ch checks, 7 HDC, (*), 14 HDC, (*), 10 HDC, (*), 14 HDC, (*), 9 HDC = 62 turns  

7. 2 ch checks, 9 HDC, (*), 15 HDC, (*), 11 HDC, (*), 15 HDC, (*), 8 HDC = 66 turns  

8. 1 ch check, 9sc, 14 ch check 18 HDC skip, 14sc, 14 ch check 18 HDC skip, 11sc = 60 frost  

9. 2 ch checks, 11 HDC, (over 14 ch) 14 HDC, 14 HDC, (over 14 ch)  

14 HDC, 9 HDC = 62 turns  

10-13 (4 rows) 62 HDC = 62 turns  

During the 14th row we make single crochet = 62sc now go behind the shirt and we make button hole as in the picture.  

diaper (Light Green)  

Note: We will knit the cloth in two pieces and stitch it together. Front Track  

1. 36 ch checks  

2. Return 34 HDC from 3rd ch.  

3-5 (3 rows) Return to 34 HDC  

6. (Skip first hole), 9 sl-st, return to 14 HDC  

Pull 1 ch, (skip first hole) 12 HDC  

8. Draw 1 ch, (skip first hole) 10 HDC turn  

9. Shoot 1 ch, (skip first hole) 8 HDC turn  

10-14 (5 rows) 2 ch pull 8 HDC finish cut the thread.  

Rear Track  

68 ch checks  

2. Return to 66 HDC starting from Ch  

3. 2 ch checks 2 HDC, (2 ch checks 2 HDC skip), 57 HDC, (2 ch checks 2 HDC skip), 3HDC turn  

4.2 checks, 66 HDC turns  

5.Check 2 ch, turn to 66 HDC  

6. (skip first hole) 15 sl-st, turn 36 HDC (we do not knit the remaining loops)  

7. (skip first hole) 1 sl-st, return to 32 HDC  

8. (skip first hole) 1 sl-st, turn 28 HDC  

9. (skip first hole) 2 sl-st, 22 HDC turn  

10. (skip first hole) 2 sl-st, return to 14 HDC  

11. (skip first hole) 2 sl-st, 8 HDC turn  

12-14 (3 rows) shoot 2 chs, finish 8 HDC. Leave the thread long to sew.  

* We sew 2 pieces we knit together like the picture.  

* We enclose the cloth we are wearing with the single crochet method as in the picture. I recommend that you sink double single crochet into the corner parts to prevent it from puckering.  

* We sew the buttons on the front part of the cloth to the places shown in the picture.  

UNICORN CONCEPT  

CLOTHING (hat-jumpsuit) RECIPE  

NOTE: Unless otherwise stated, it is spiral continue by knitting. While knitting order loop setting so as not to confuse  

You can use. Loop at the end of each row writes the number.  

MATERIALS:  

* Ropes: 50 gr./125 m. Snowball Organica;  

Dark Pink-257  

Pink-782  

Turquoise-576  

Orange-1311  

purple -1721  

Yellow-1335  

Catania  

Green-241  

Lanosa Simsim  

Silver  

* Crochet: 2 mm. * 3 white bonibon buttons  

* 2 dark pink shirt buttons  

* 1 snap  

* Line sewing thread  

* Sewing needle and fixing needle  

Note: When knitting, ignore the color of thread used in the pictures. in Title  

Knit according to the rope colors written. The pictures are representative pictures for illustrative purposes. 

HAT (light pink)  

1. Magic ring 6sc  

2.6inc = 12sc  

3. (sc, inc) * 6 = 18sc  

4. sc, inc, (2sc, inc) * 5, sc = 24sc  

5. (3sc, inc) * 6 = 30sc  

6.2sc, inc, (4sc, inc) * 5, 2sc = 36sc  

7. (5sc, inc) * 6 = 42sc  

8. 3sc, inc, (6sc, inc) * 5.3sc = 48sc  

9. (7sc, inc) * 6 = 54sc  

10.4sc, inc, (8sc, inc) * 5.4sc = 60sc  

11. (9sc, inc) * 6 = 66sc  

12.5sc, inc, (10sc, inc) * 5,5sc = 72sc  

13. (11sc, inc) * 6 = 78sc  

14.6sc, inc, (12sc, inc) * 5,6sc = 84sc  

15. (13sc, inc) * 6 = 90sc  

16-27 (12 rows) = Continue without breaking the 90sc thread.  

Now we move on to making the side bands of the hat.  

1. Back to 7sc (we put the marker here.)  

2. Skip the first hole, turn 6sc.  

3. Skip the first hole 5sc.  

Skip the first hole  

5-26 (22 rows) = 4sc (we knit by rotating each row)  

27. Skip the first hole turn 3sc  

28. Skip the first hole turn 2sc  

29. Skip the first hole, cut the sc thread.  

We make the 2nd tape. From the place where we put the marker, rope to the 29th hole  

We are installing.  

1. Back to 7sc  

2. Skip the first hole, turn 6sc.  

3. Skip the first hole 5sc.  

Skip the first hole  

5-26 (22 rows) = 4sc (we knit by rotating each row)  

27. Skip the first hole turn 3sc  

28. Skip the first hole turn 2sc  

29. Skip the first hole sc (we continue without breaking the rope of the hat and tapes we surround it with single crochet.)  

Note: When our hat is finished, the front separation of the hat will be shorter than the rear separation.  

we will place the eyes and nose. Optionally sl-st the front of the hat  

You can do.  

HORN  

1. Magic ring 6sc  

2. = 6sc  

3. (2sc, inc) * 2 = 8sc  

4. (sc, inc) * 4 = 12sc  

5-8 (4 rows) = 12sc  

9. (5sc, inc) * 2 = 14sc  

10. = 14sc  

11. (6sc, inc) * 2 = 16sc  

12. = 16sc  

13. (7sc, inc) * 2 = 18sc  

14. (8sc, inc) * 2 = 20sc  

15. = Sew and finish the thread long to sew 20sc. * 6-14 from the front, with the horn centered on the hat. on desks  

We plant.  

HAT DECORATION  

bangs  

1. 14 ch checks 2. Sl-st from 2 Ch, 2sc, 2 HDC, 8 DC (turquoise)  

2. 14 ch checks 2. Sl-st from 2 Ch, 2sc, 2 HDC, 8 DC (yellow)  

3. 14 ch checks 2. Sl-st from 2 Ch, 2sc, 2 HDC, 8 DC (orange)  

4. 14 ch checks 2. Sl-st from 2 Ch, 2sc, 2 HDC, 8 DC (dark pink)  

5. 14 ch checks 2. Sl-st from 2 Ch, 2sc, 2 HDC, 8 DC (purple)  

6. 14 ch checks 2. Sl-st from 2 Ch, 2sc, 2 HDC, 8 DC (green)  

7. 14 ch checks 2. Sl-st from 2 Ch, 2sc, 2 HDC, 8 DC (turquoise)  

mane  

1. Return to 50 ch check 2. 49sc from the ch (orange)  

2. Return to 50 ch check 49sc from 2.ch (orange)  

3. Check back at 50 ch 49sc (dark pink) starting at 2.ch  

4. Check back at 50 ch 49sc from 2nd ch (dark pink)  

5. Return to 50 ch check 49sc from the 2nd ch (purple)  

6. Check back at 50 ch 49sc from the 2nd ch (purple)  

7. Return to the 50 ch check 49sc from the 2nd ch (green)  

8. Back to 50 ch check 49sc from 2nd ch (green)  

9. Return to 50 ch check 49sc from 2nd ch (turquoise)  

10.50 ch check back 49sc from 2nd ch (turquoise)  

RUFFLED JUMPSUIT RECIPE (pink color)  

(*): HDC, 1 ch check, HDC into the same hole  

“(*)” Explanation in red where you can see this sign  

We apply. We are increasing this process.  

Note: Increments in the previous row by pulling the chain into the holes we created we will do it by sinking.  

1. 44 ch checks  

2. Starting from 3rd ch 5 HDC, (*), 10 HDC, (*), 6 HDC, (*), 10 HDC, (*), 7 HDC = 46 turn  

3.check 2 ch, 7 HDC, (*), 11 HDC, (*), 7 HDC, (*), 11 HDC, (*), 6 HDC = 50 turns  

4.2 checks, 6 HDC, (*), 12 HDC, (*), 8 HDC, (*), 12 HDC, (*), 8 HDC = 54 turns  

5. 2 ch checks, 8 HDC, (*), 13 HDC, (*), 9 HDC, (*), 13 HDC, (*), 7 HDC = 58 turns  

6. 2 ch checks, 7 HDC, (*), 14 HDC, (*), 10 HDC, (*), 14 HDC, (*), 9 HDC = 62 turns  

7. 2 ch checks, 9 HDC, (*), 15 HDC, (*), 11 HDC, (*), 15 HDC, (*), 8 HDC = 66 turns  

8. 1 ch check, 9sc, 14 ch check 18 HDC skip, 14sc, 14 ch check 18 HDC skip, 11sc = 60 frost  

9. 2 ch checks, 11 HDC, (over 14 ch) 14 HDC, 14 HDC, (over 14 ch)  

14 HDC, 9 HDC = 62 turns  

10-17 (8 rows) 2 ch checks, 62 HDC = 62 turns  

* 17. When we knit and finish the row, we connect the two ends as in the picture. A chain we pull and cut our rope. * Now we will knit where there will be leg separation. On the front part of the piece we duck we find the middle point and mark it.  

* We count 13 loops from the left and right of the mark and mark again. Middle  

we take out the marker. Markers on the sides until the overalls are completely finished we will not subtract. * We will do over 25 stitches in total at the front. Of the place we marked we start knitting from the knot next to it.  

You can understand it better by examining the pictures.  

18.check 2 ch, turn to 24 HDC  

19.Check 1 ch, (skip first hole) 1 sl-st, 20 HDC turn  

20. Shoot 1 ch, (skip first hole) 1 sl-st, turn 16 HDC  

21. Take 1 ch, (skip first hole) 1 sl-st, 12 HDC turn  

22. draw 1 ch, (skip first hole) 1 sl-st, 8 HDC turn  

23-26 (4 rows) 2 ch shots, 7 HDC turns finish.  

* Now we will knit the piece on the back. Next to the stitch we marked  

We start from the loop.  

Front Side  

11th  

18.Check 2 chs, return to 35 HDC  

19.Check 1 ch, (skip first loop) 1 sl-st, return to 31 HDC  

20. Take 1 ch, (skip first loop) 1 sl-st, 27 HDC turn  

21. Take 1 ch, (skip first loop) 1 sl-st, 23 HDC turn  

22. draw 1 ch, (skip first loop) 1 sl-st, return to 19 HDC  

23.Check 1 ch, (skip first loop) 1 sl-st, return to 15 HDC  

24. 1 ch draw, (skip first loop) 1 sl-st, 11 HDC turn  

25. Pull 1 ch, (skip first loop) 1 sl-st, 8 HDC turn  

Take 26-30 (5 rows) 2 ch, turn 7 HDC and tie the dark pink string.  

* Now around the lower part of our overalls with a dark pink string like the picture  

We surround the knitting single crochet.  

* We will make a ruffle like the picture on the upper part of the legs. We attach our markers from the front to the 19th row and from the rear to the 20th row.  

* Now we will knit a ruffle between this marked place. 1. Double HDC for each loop between the places we have marked, e.g. Frost. 2. Double HDC for each loop between the places we have marked, e.g. Frost. 3. We knit single crochet in each loop between the places we have marked and finish.  

* We apply the same procedure to the other leg.  

* We will now ruffle the arms. On the top of the arm as shown  

we wear the crochet hook. We will knit a ruffle on 18 HDC that we jumped in 8th on the overalls. During the 1st row we knit double HDC on each loop. During the 2nd row we knit double HDC on each loop. Along the 3rd row, we knit single crochet in each loop and finish.  

* We apply the same process to the other arm.  

* Now we will knit buttonhole for the back, button snap on the net and back  

We will sew buttons on the part. We will do this by following the pictures. * Chain on the back where we want to knit flat places with single crochet and make buttonholes  

We’re shooting.  

RAINBOW APPLIQUE  

1.8 ch checks  

2. starting from 2nd ch 7inc = 14sc (each we will change the color in the order)  

3-7 (5 rows) = 14sc  

Clouds (2)  

1.7 ch  

2. from the 2nd ch inc, sc, 2  

3-hand railing, sc, last remaining chain w, sc, 2 of 3 finish handrail, sc, sl-st.  

We sew the cloud to two sides as in the picture. Then on my overalls we place and sew. 

Similar Posts