Happy Christmas Blue Santa Claus Amigurumi Free Pattern

Happy christmas blue santa claus amigurumi free pattern is waiting for you in this article. You can find Amigurumi free patterns on our website.

Materials: 

 yarn Nako Paris color white 208 (40% acrylic, 60% polyamide, 245 m/100g) (beard, mustache, wig) 

 yarn Lanoso baby dream color smoky pink 937 (100% baby anti-pilling acrylic, 265 m/100 g) (head, arms, body) 

 Yarn Art Jeans bright turquoise 33 (55% cotton, 45% polyacryl, 160m/50g) (hat, boots) 

 Yarn Art Jeans color navy blue 54 (55% cotton, 45% polyacrylic, 160m/50g) (soles, pants) 

 Alizie softy baby color white 55 (100% micropolyester, 115m/50g) (boot bindings, fur coats, hats) 

 Vita Coco dark green turquoise 4315 (100% mercerized cotton, 240m/50g) (for coat) 

 hook No. 1.6, 

 scissors, 

 filler, 

 pins, 

 needle for yarn, 

 thick cardboard or thin 

plastic for insoles 

 wire for the frame with a cross section of 1.5 mm about 80 cm without braid (2 pieces of 25 cm for the legs and two pieces of 15 cm for the handles (optional), 

 Adhesive plaster for insulating the ends of the wire 

 stitch marker 

 “iris” thread for embroidering eyes. You can also use any suitable ready-made eyes of your choice. The height of the toy when using materials like the author’s will be 29 cm. 

Abbreviations 

ch-chain 

sl-st – slip stitch 

sc – single crochet 

hdc – half double crochet 

dc-double crochet 

inc – increase 

dec – decrease. 

Knitting is knitted in a spiral, unless otherwise indicated. Follow the stitch marker. 

PATTERN 

*Hands x2* 

We knit with body color. Follow the marker! 

Left hand 

1) 6 sc into magic ring (6) 

2) 6 inc (12) 

3) (1 sc, inc)x6 (18) 

4-5) 18 sc (2 rows) (18) 

6) 1 sc, (4 dc with a common top in one loop of the base) – this is a thumb, 16 sc (18) 

7) 1 sc, (3 sc, dec)x3, 1 sc (15) 

8) 5 sc, dec, 8 sc (14) – the decrease is on the palm. 

9) 5 sc, 2 dec, 5 sc (12) 

10) (2 sc, dec)x3 (9) 

11) (2 sc, inc)x3 (12) 

12-20) 12 sc (9 rows) (12) 

21) 1 sc, 2 dec, 2 sc, 2 inc hdc (this is the elbow), 3 sc (12) 

22) 1 sc, 2 inc, 2 sc, 2 dec, 3 sc (12) 

23-24) 12 sc (2 rows) (12) 

25) (inc, 5 sc)x2 (14) 

26-31) 14 sc (6 rows) (14) 

Right hand 

1) 6 sc into magic ring (6) 

2) 6 inc (12) 

3) (1 sc, inc)x6 (18) 

4-5) 18 sc (2 rows) (18) 

6) 16 sc, (4 dc with a common top in one loop of the base) – this is a thumb, 1 sc (18) 

7) 2 sc, (3 sc, dec)x3, 1 sc (15) 

8) 8 sc, dec, 5 sc (14) 

9) 5 sc, 2 dec, 5 sc (12) 

10) (2 sc, dec)x3 (9) 

11) (2 sc, inc)x3 (12) 

12-20) 12 sc (9 rows) (12) 

21) 3 sc, 2 inc hdc (elbow), 2 sc, 2 dec (elbow), 1 sc (12) 

22) 3 sc, 2 dec, 2 sc, 2 inc, 1 sc (12) 

23-24) 12 sc (2 rows) (12) 

25) (inc, 5 sc)x2 (14) 

26-31) 14 sc (6 rows) (14) 

Legs x2 

Let’s start with the color of the shoes. The marker goes exactly in the middle of the heel. 

Sole 

Dark color of your choice. 

1) 5 ch We knit in a chain from the second loop from the hook: 3 sc, 3 sc in the last loop. Work rotation. We knit on the reverse side of the chain: 2 sc, inc (10) 

2) 1 inc, 2 sc, 3 inc, 2 sc, 2 inc (14) 

3) 1 sc, 1 inc, 2 sc, (1 sc, inc)x3, 2 sc, (1 sc, inc)x2 (22) 

Leg 

1) 5 ch We knit in a chain from the second loop from the hook: 3 sc, 3 sc in the last loop. Work rotation. We knit on the reverse side of the chain: 2 sc, inc (10) 

2) 1 inc, 2 sc, 3 inc, 2 sc, 2 inc (14) 

3) 1 sc, 1 inc, 2 sc, (1 sc, inc)x3, 2 sc, (1 sc, inc)x2 (22) 

On thin plastic or thick cardboard, trace the outline of the resulting part, cut it out. We make two such insoles. 

Now we form a sandwich: 

outer insole (sole), cardboard or plastic insole, inner insole. 

Both insoles are placed on the wrong side of the cardboard or plastic insole. 

4) Hold the outer insole towards you. We knit the whole row, capturing the back half loops of the outer insole and the back half loops of the inner: 22 sc (22) 

5) 22 sc (22) 

6) 6 sc, 5 dec, 6 sc (17) 

7) 5 sc, 3 dec, 4 sc, 1 dec (13) 

8-11) 13 sc (4 rows). In the last loop of 14 rows, change the color to the color of the pants. Do not cut the thread. Bring it to the outside of the canvas. Later (or in the process of working, knitting several rows, if it’s more convenient for you), this thread should be knitted sl-st for free half loops. 

12) Whole row for back half loops: 13 sc (13) 

13) 3 sc, inc, 6 sc, inc, 2 sc (15) 

14-18) 15 sc (5 rows) (15) 

19) 14 sc, inc (16) 

Cut the thread at the first leg. This will be the left leg. At the second we continue knitting. We connect the legs and proceed to knitting the body. 

*Body* 

If you plan to insert a frame, then you need to do this before you stuff your toy. 

We stuff the legs tightly. 

20) Make sure you finish at the middle of your inner thigh. If this is not the case, work a few sc offsets. 

3 ch, attach the thread to the middle loop of the inside of the left leg. 16 sc on the left leg, 3 sc on the chain, 16 sc on the right leg, 3 sc on the chain. We put a marker. (38) 

21) 3 inc, 12 sc, inc, 3 sc, inc, 12 sc, 6 inc (49) 

22) (10 sc, inc)x3, 16 sc (52) 

23-25) 52 sc (3 rows) 

26) 10 sc, dec, 22 sc, dec, 16 sc (50) 

27) 10 sc, dec, 22 sc, dec, 14 sc (48) 

28-29) 48 sc (2 rows) (48) 

30) (6 sc, dec)x6 (42) 

31) 42 sc (42) 

Change the thread to the color of the body. 

32) The whole row for the back half loops: (5 sc, dec) x6 (36) 

33-35) 36 sc (3 rows) (36) 

36) 10 sc, inc, 14 sc, inc, 10 sc (38) – these increases should go along the sides of the body. We follow the marker from this row, it should be strictly in the middle of the back. 

37-39) 38 sc (3 rows) (38) 

40) 10 sc, inc, 16 sc, inc, 10 sc (40) 

41-44) 40 sc (4 rows) (40) 

45) We knit the hands: 6 sc along the body (Part of the back), 7 sc along the canvas of the body and arms together, 14 sc along the body (chest), 7 sc along the canvas of the body and arms together, 6 sc along the body (second part of the back) ( 40) 

Important!!! The thumb is facing the body. 

46) 6 sc, 7 sc in remaining hand sts, 14 sc, 7 sc in remaining hand sts, 6 sc (40) 

47) 5 sc, dec from 1 body loop and 1 arm loop, 5 sc, dec from 1 arm loop and 1 body loop, 12 sc, dec from 1 body loop and 1 arm loop, 5 sc, dec from 1 arm loop and 1 body loops, 5 sc (36) 

48-49) 36 sc (2 rows) (36) 

50) (4 sc, dec)x6 (30) 

51) (3 sc, dec)x6 (24) 

52) (2 sc, dec)x6 (18) 

53) (dec, 4 sc)x3 (15) 

54-58) 15 sc (5 rows) (15) 

Finish. 

*Head* 

Knit with body color 

1) 6 sc into magic ring (6) 

2) 6 inc (12) 

3) (1 sc, inc)x6 (18) 

4) (2 sc, inc)x6 (24) 

5) (3 sc, inc)x6 (30) 

6) 2 sc, inc, (4 sc, inc)x5, 2 sc (36) 

7) (5 sc, inc)x6 (42) 

8-10) 42 sc (3 rows) (42) 

11) 10 sc, dec, 18 sc, dec, 10 sc (40) – these two decreases are located at the temples, so the forehead takes on a somewhat convex shape. 

The marker should go in the center of the back of the head! 

12) 40 sc (40) 

13) 10 sc, inc, 18 sc, inc, 10 sc (42) 

14) (6 sc, inc)x6 (48) 

15) 48 sc (48) 

16) 14 sc, 6 inc, 8 sc, 6 inc, 14 sc (60) – the increase will form the cheeks. 

17-18) 60 sc (2 rows) (60) 

19) Change the thread to white, move on to knitting a beard. We knit the entire row for the back half loops: 60 sc (60) 

20-22) 60 sc (3 rows) (60) 

23) (8 sc, dec)x6 (54) 

24) 54 sc (54) 

25) (7 sc, dec)x6 (48) 

26) (6 sc, dec)x6 (42) 

27) (5 sc, dec)x6 (36) 

28) 2 sc, dec, (4 sc, dec)x5, 2 sc (30) 

29) (3 sc, dec)x6 (24) 

30) Change the thread to the color of the body. (2 sc, dec)x6 (18) 

31) (1 sc, dec)x6 (12) 

32-36) 12 sc (5 rows) (12) 

Stuff the top of the head and cheeks well, do not stuff the beard tightly. Here we will do the tightening of the mouth. 

We fill the neck after tightening and insert it inside the neck on the body, sew the head to the body. 

*Wig* 

White color. 

1) 6 sc into magic ring (6) 

2) 6 inc (12) 

3) (1 sc, inc)x6 (18) 

4) (2 sc, inc)x6 (24) 

5) (3 sc, inc)x6 (30) 

6) (4 sc, inc)x6 (36) 

7) incomplete row: 24 sc, 1 ch turn of knitting. 

Next, we knit in rotary rows. At the end of each row we knit 1 ch turn 

8-9) inc, 24 sc (23) 

10) 26 sc (26) 

11) inc, 24 sc, inc (28) 

12) 28 sc (28) 

Finish. 

*Moustache x2* 

white color 

1) 6 sc into magic ring (6) 

2) (1 sc, inc)x3 (9) 

3-4) 9 sc (2 rows) (9) 

5) dec, 7 sc (8) 

6) dec, 6 sc (7) 

7) dec, 5 sc (6) 

8) dec, 4 sc (5) 

9) dec, 3 sc (4) 

Finish. 

*Nose* 

We knit with skin color. 

1) 6 sc into magic ring (6) 

2) 6 inc (12) 

3) (1 sc, inc)x6 (18) 

4) 18 sc (18) 

5) (1 sc, dec)x6 (12) 

Finish. 

*Ears x2* 

We knit with skin color. We knit in turning rows. 

1) 6 sc into magic ring. We do not close the ring. 1 ch turn. 

2) (1 sc, inc) x2, 1 sc, 1 sl-st. Cut the thread, fasten. 

*Mouth* 

1) 8 sc into magic ring. 

Tie along the contour with connecting posts. 

Hat 

Clothing color. 

1) 6 sc into magic ring (6) 

2) 6 inc (12) 

3) (1 sc, inc)x6 (18) 

4) (2 sc, inc)x6 (24) 

5) (3 sc, inc)x6 (30) 

6) 30 sc (30) 

7) 2 sc, inc, (4 sc, inc)x5, 2 sc (36) 

8) 36 sc (36) 

9) (5 sc, inc)x6 (42) 

10-12) 42 sc (3 rows) (42) 

13) 3 sc, inc, (6 sc, inc)x5, 3 sc (48) 

14-16) 48 sc (3 rows) (48) 

Fasten the thread and cut. 

We attach white yarn, I have it Alizie softy baby, and knit for the back half loops of the 16th row: 

17) (2 sc, skip one st) x to end of row 

18-20) sc the whole row (3 rows). Fasten the thread, cut, hide. This is the lapel of the hat. 

Pompon 

Pompons can be purchased ready-made, can be made according to the classical method, or can be knitted: 

1) 6 sc into magic ring (6) 

2) 6 inc (12) 

3) (1 sc, inc)x6 (18) 

4-6) 18 sc (3 rows) (18) 

7) (1 sc, dec)x6 (12) 

Hit hard. 

8) 6 dec (6). Fasten the thread, leave the end for sewing and sew to the hat in the center of the Magic ring. 

Decorate the hat to your liking. 

Coat 

Yarn Vita Coco. Clothing color. 

We collect a chain of air loops: 34 + 3 ch lifting. We knit in turning rows. 

3 ch lifts count as the first dc. 

We knit raglan like this: 1 dc, 1 ch 1 dc – in one loop. Further in the text, this combination is designated by the word “raglan”. 

1) We knit in the 4th loop from the hook and continue along the chain 5 dc (shelf), raglan, 5 dc (sleeve), raglan, 10 dc (back), raglan, 5 dc (sleeve), raglan, 5 dc (shelf). 

2) 6 dc, raglan, 7 dc (sleeve), raglan, 12 dc (back), raglan, 7dc (sleeve), raglan, 6 dc (shelf) 

3) 7 dc, raglan, 9 dc, raglan, 14 dc, raglan, 9 dc, raglan, 7 dc 

4) 8 dc, raglan, 11 dc, raglan, 16 dc, raglan, 11 dc, raglan, 8 dc 

5) 9 dc, skip sleeve sts (13 dc), 18 dc on back, skip sleeve sts (13 dc), 9 dc on front (36) 

6) 9 dc, 1inc dc, 16 dc, 1 inc dc, 9 dc (38) 

7) 38 dc (38) 

8) 10 dc, 1 inc dc, 16 dc, 1 inc dc, 

10 dc (40) 

9) 40 dc (40) 

We try on a fur coat for grandfather. If the length suits, then we fix the thread and cut it off. 

Remember that the fur coat should be tied with two more rows of yarn, the length will be added. 

Sleeve x2 

We knit dc in a circle in the closing rows of 6 rows. 

Each row starts 3 ch of instep instead of the first dc and completes 1 sl-st in the third ch of instep. We also try on a fur coat for grandfather and notice the length of the sleeve. 

strapping 

We tie a fur coat in white: we attach the thread to the first loop from which we started knitting a fur coat. We tie it like this: (2 sc in, skip 1 loop) 

– to end. Into magic ring in each corner we knit 2 sc in one loop. 

We tie 2-3 rows of white yarn, fasten the thread, cut it off, hide the tip of the thread. 

We tie the sleeves in the same way. 

We tie boots. We attach a white thread to the half loops of the 4th row of boots and knit 1 sc into magic ring for each loop for the free half loops. We fix the thread, cut it off, hide the tip. 

On the inside of the fur coat, I sewed a small button, and on the opposite side I made a loop. 

Assembly 

Sew on the mustache in the center of the face between rows 18 and 19. 

We sew a nose on the head. We sew for half loops 18 rows of the head and nose loops at the same time. 

Mouth tightening Use strong thread. 

Point 1 is located in the area of 17-18 rows above the nose in the center. 

Point 2 is 2 cm below the nose and mustache in the center. 

Point 3 is two loops away from point 2. 

Insert the needle into point 1. and output in v.2. step back two stitches, insert the needle into v. 3, thread over the work. From v.3 to v.2. , from v.2 to v.1. Pull the ends and secure them with a strong knot. Hide the ends in the head. 

We perform a similar tightening on the other side: from v.1 to v.4, from v.4 to v.2, bring the needle into v.1., pull, fix, hide the ends in the head. 

In the place of the formed tightening, sew a mouth. 

Do not rush, play with the design. Mark the places of each detail, pin with pins. And only when the result suits you, start sewing. 

For tinting grandfather, I used watercolor pencils. You don’t need to tone a lot, don’t overdo it. 

Sew on the ears. From the center of the indents into the magic ring on each side 5-6 cm and sew at eye level between 16-18 rows. 

We embroider eyes. 

Sew a pompom to the hat. 

We fit the wig, fix it with pins on the head, then sew it with ordinary white sewing threads in two additions. 

We comb the mustache, beard and wig with a slicker brush. 

We embroider eyebrows. Optionally, you can knit and sew them: 5-6 ch, knit in the second loop from the hook and continue along the chain 1 sl-st, 4 sc, 1 sl-st. 

Decorate the hat, coat and boots to your liking.