Wonderful amigurumi animal patterns are with you for free. You will love the amigurumi penguin pattern in this article.
Abbreviations
Mr = Magic ring
sc = single crochet
inc = Increase
dec = decrease
sl-st = slip-stitch
dc =double crochet
PATTERN
Well =) We start our knitting =)
Wings (2 pcs.):
We knit in rotary rows, in at the beginning of each row do ch lifting.
We knit 2 details (2 additional details color and 2 main, thread by end of knitting the main color is not cropped) (see diagram)
2 CH
1) from the second loop we knit 3 sc in one loop
2) 3 sc
3) inc, 1 sc, inc (5)
4) 5 sc
5) inc, 3 sc, inc (7)
6) 7 sc
7) inc, 5 sc, inc (9)
8) inc, 7 sat, inc (11)
9) – 14) 11 sc (6 rows)
15) dec, 7 sc, dec (9)
16) 9 sc
17) dec, 5 sc, dec (7)
18) -19) 7 sc (2 rows), add. Colors fasten the thread, cut it off; at do not cut the main color (we will sew wings with this thread between themselves).
Connect our wings and around the perimeter we tie sc to the main color, at the tip of the wing make 3 sc (corner), on top you should get 7 sc, cut the thread, we fix.
The wings will knit into the body.
We knit the second wing for sure same.
We knit the body – the head, and we will knit the wings along knitting.
1) 6 sc in to magic ring
2) 6 inc (12)
3) (1 sc, inc) * 6 (18)
4) 1 sc, inc, (2 sc, inc) * 5, 1 sc (24)
5) (3 sc, inc) * 6 (30)
6) 2 sc, inc, (4 sc, inc) * 5, 2 sc (36)
7) (5 sc, inc) * 6 (42)
8) 3 sc, inc, (6 sc, inc) * 5, 3 sc (48)
9) (7 sc, inc) * 6 (54)
10) 4 sc, inc, (8 sc, inc) * 5, 4 sc (60)
11) – 16) 60 sc (6 rows)
17) (8 sc, dec) * 6 (54)
18-19) 54 sc (2 rows)
20) (7 sc, dec) * 6 (48)
21) – 23) 48 sc (3 rows)
24) (6 sc, dec) * 6 (42)
25) – 26) 42 sc (2 rows)
27) (5 sc, dec) * 6 (36)
28) -29) 36 sc (2 rows)
30) (4 sc, dec) * 6 (30)
31) -32) 30 sc (2 rows)
33) We knit wings (we knit through the walls of the wing and body at the same time): 8 sc, 7 sc with wing, 8 sc, 7 sc with wing
34) (3 sc, dec) * 6 (24)
35) – 36) 24 sc (2 rows)
37) (2 sc, dec) * 6 (18), fill body
Next, we knit immediately the head
38) 18 inc (36 sc)
39) (5 sc, inc) * 6 (42)
40) 3 sc, inc, (6 sc, inc) * 5, 3 sc (48)
41) (7 sc, inc) * 6 (54)
42) 4 sc, inc, (8 sc, inc) * 5, 4 sc (60)
43) – 49) 60 sc (7 rows)
50) 4 sc, dec, (8 sc, dec) * 5, 4 sc (54)
51) (7 sc, dec) * 6 (48)
52) 3 sc, dec, (6 sc, dec) * 5, 3 sc (42)
53) (5 sc, dec) * 6 (36)
54) 2 sc, dec, (4 sc, dec) * 5, 2 sc (30)
55) (3 sc, dec) * 6 (24)
56) 1 sc, dec, (2 sc, dec) * 5, 1 sc (18), fill the head
57) (1 sc, dec) * 6 (12)
58) 6 dec, cut the thread, fix, tighten the hole
Breast
(we knit in rotary radas just like wings):
9 CH
1) from the second loop we knit 8 sc
2) inc, 6 sc, inc (10)
3) inc, 8 sc, inc (12)
4) inc, 10 sc, inc (14)
5) inc, 12 sc, inc (16)
6) inc, 14 sc, inc (18)
7) inc, 16 sc, inc (20)
8) 20 sc
9) inc, 18 sc, inc (22)
10) inc, 20 sc, inc (24)
11) 3 sc in 1 loop, 22 sc, 3 sc in 1 loop (28)
12) – 18) 28 sc (7 rows)
19) dec, 24 sc, dec (26)
20) dec, 22 sc, dec (24)
21) dec, 20 sc, dec (22)
22) dec, 18 sc, dec (20)
23) dec, 16 sc, dec (18)
24) dec, 14 sc, dec (16)
Next we tie sc around the entire perimeter.
Second breast
(inc. “Yarnart” “Mink”):
(we also knit in rotary rows): 10 CH
1) from the second loop we knit 9 sc
2) inc, 7 sc, inc (11)
3) inc, 9 sc, inc (13)
4) inc, 11 sc, inc (15)
5) inc, 13 sc, inc (17)
6) – 7) 17 sc (2 rows)
8) dec, 13 sc, dec (15)
9) dec, 11 sc, dec (13)
10) dec, 9 sc, dec (11)
11) dec, 7 sc, dec (9)
12) dec, 5 sc, dec (7)
13) dec, 3 sc, dec (5)
14) dec, 1 sc, dec (3 sc)
15) all 3 together, thread cut, fasten
Legs
(Including “YarnArt” “Jeans”, 2 pcs.):
We knit 3 fingers, on the 1st and 2nd we cut the thread, and on the 3rd do not cut, we will knit on:
1) 6 sc in to magic ring
2) (1 sc, inc) * 3 (9)
3) 9 sc
Next we connect everything fingers between each other at the junctions we will inc omit 1 loop on both fingers (see diagram).
We knit 4 sc, then follow second finger 4 sc on the third finger 8 sc, do not forget what’s between the fingers 1 loop on both sides we let knit 2 fingers again the back of 4 sc, and along the first finger 4 sc.
4) Connected (24 sc)
Holes formed we sew, we knit further.
Now for the marker you can not follow. We make decavki from both parties, through a row (incost fold in half and do decavs at the very edges)
5) two dec from 2 sides (one on each side) (22 sc)
6) 22 sc
7) dec from 2 sides (20 sc)
8) 20 sc
9) dec from 2 sides (18 sc)
10) 18 sc
11) dec from 2 sides (16 sc), fill the foot in the course of knitting
12) 16 sc
13) dec from 2 sides (14 sc)
14) 14 sc
15) dec from 2 sides 12 sc
16) dec from 2 sides (10 sc)
17) 5 dec
Muzzle
(we knit inc colors, see diagram):
12 CH
1) we knit from the second loop: inc, 9 sc, 4 sc last loop, deploy knitting and knitting on the bottom side of the chain (it turns out oval): 9 sc, inc (26)
2) 2 inc, 9 sc, 4 inc, 9 sc, 2 inc (34)
3) (1 HDC, inc HDC) * 2, 3 HDC, 3 sc, 3 HDC, (1HDC, inc HDC) * 4, 9 sc, (1HDC, inc HDC) * 2 (42), we cut the thread, fix
Eyes
(we knit incVita Coco): (eye consists of white and black part)
White part of the eye:
1) 6 sc in to magic ring
2) 6 inc (12)
3) Turn the knitting and we knit in the opposite direction (1 sc, inc) * 5 (15), we are looking for middle loop and knit in her 4 sc, slst with the first loop
3) Further knitting is not unfold and knit 6 sc, 6 SLST, 6 sc (18)
İnc connect the black thread colors and we bind SLST for loop front wall pulling out the loops so as not to goggle (see a photo).
Black part of the eye:
4 CH
1) we knit from the second loop: 2 sc, to the outermost loop 3 sc, expand the knitting knit on the undersidechains (oval) 1 sc, inc (8)
2) inc, 1 sc, 3 inc, 1 sc, 2inc (14), slst thread cut, leaving the end for we fix İncish the black part eyes to white (see photo), embroider flare.
Beak
(we knit inc”YarnArt” “Jeans”)
1) 6 sc in to magic ring
2) (1 sc, inc) * 3 (9)
3) (2 sc, inc) * 3 (12)
4) 2 inc HDC, 1 sc, 2 inc HDC, 1 sc, 2 inc HDC, 1 sc, 2 inc HDC, 1 sc (20)
4) 1 sc, inc HDC, 1 HDC, inc HDC, 7 sc, inc HDC, 1 HDC, inc HDC, 6 sc (24)
5) 24 sc, slst cut the thread, leave end for inscription we fix.
Tail
1) 6 sc in to magic ring
2) (1 sc, inc) * 3 (9)
3) 9 sc
4) (2 sc, inc) * 3 (12)
5) 12 sc
6) (3 sc, inc) * 3 (15)
7) 15 sc
8) (4 sc, inc) * 3 (18)
9) 18 sc, slst, cut the thread, fasten, a little fill the tail.
TOY ASSEMBLY
İncish a breast from inc Yarnart Mink on top main breast.
Next, insert the breast to to the body.
İncishimu muzzle incamo over the breast, fill a little cheek.
Next, we sew the legs from below the body.
We make a face.
İncish the beak in the middle of the cheeks (inc beak shape yourself along the way Including a bit of it fill).
We embroider with black thread a strip in the middle beak.
İncish eyes white thread behind the back wall loops (the thread remains with us, when we blindfolded around the perimeter black front thread color wall).
We embroider the eyebrows.
Do the back of the head (optional).
For this i cut inc “YarnArt” “Jeans” blue colors on fragments and inc tied to each a loop on a knot on one piece of thread.
The number of threads that need to inc individually and individually depends on your desire and taste.
Then you need them to cut, namely trim to that length which will seem to you optimal.
İncish a little tail flattening it.
YOUR PENGUINS READY!
