Christmas Bear Amigurumi Free Pattern

I continue to share amigurumi free patterns. In this article, christmas bear amigurumi free pattern is waiting for you.

Material used:

  1. Yarn: Nako Lily (100g – 180m, 100% polyester), color 6651 cream – 1 skein, body bears.

Alize Lanagold Classik (100g – 240m, 49% wool, 51% acrylic), color 55 white – 1 skein, foot

Alize Softy (50g – 115m, 100% micropolyester), color 55 white – 1 skein, for nose

Alize Superlana klasik (100g – 280m, 25% wool, 75% acrylic), color 56 red – 1

a skein, for a coat and a hat.

YarnArt Jeans (50g – 160m, 55% cotton, 45% acrylic), color 26 red – 1 skein, for bag.

YarnArt Mink (50g – 75m, 100% polyamide), color 330 white – 1 skein, for coats and

hats.

Nako Mohair Delicate (100g – 500m, 40% mohair, 60% acrylic), color 6101 white – 1

skein, for pompons

  1. Filler (holofiber or synipuch)
  2. Hook No. 2.5
  3. Needles No. 2.5 (5 pcs) and circular needles on line No. 2.5 – 2 pcs.
  4. A needle with a wide eye for stitching details
  5. Thick cardboard (plastic) for the insoles (I use plastic covers for

cans)

  1. Cotter pins (2.5 cm) and discs (20 mm) for attaching handles and legs
  2. Buttons white-blue (11 mm) for a coat – 3 pieces
  3. Half-beads with fastening, for eyes (8 mm) – 2 pieces
  4. Spout with fastening, 20 mm wide, 15 mm high
  5. Scissors and nippers
  6. Yarn in the color of the bear’s body, for tightening the muzzle
  7. English clubs to hold parts together

Abbreviations

Ch – chain loop

ss – connecting post

Sc – single crochet

Inc – increase (knit 2 sc in 1 loop)

Dec – decrease (knit 2 sc together)

  • – repeat the specified number of times

The number in brackets at the end of each row of the description indicates how much should be

loops in this row.

Face – front loop

purl – purl loop

k – edge (we remove the first loop, we knit the last one with the purl)

inc – an increase (from one loop we knit two, first for the front wall of the loop,

then behind the back)

dec – decrease (we knit two loops together)

Cotter pin connection:

What is a cotter pin joint that is traditionally used in knitted

a toy, in particular in bears. This is

flexible connection

handles and legs. They can rotate freely,

the connection is very reliable.

To make in your toy

we need a cotter pin: cotter pins

T-shaped, discs, pliers and toy parts.

Take the cotter pin, thread it into the disc and

we fix it in the first part of the toy.

Then we insert into the second part

cotter pin, we put on the disk on top and with

using pliers we twist the antennae

cotter pin clockwise. Everything is very just!

PATTERN

Legs (2pcs):

Feet (2 pcs):

White thread Alize Lanagold Classik:

1st row: we collect 7 ch, starting from the 2nd

crochet loops: 5 sc, 3 sc in

the last loop, then we knit along

the other side of the chain: 4 sc, inc (14)

We continue to knit in a circle.

2nd row: inc, 4 sc, 3 inc, 4 sc, 2 inc (20)

3rd row: 1 sc, inc, 4 sc, (1 sc, inc) * 3, 4

sc, (1 sc, inc) * 2 (26)

4th row: 2 sc, inc, 4 sc, (2 sc, inc) * 3, 4

sc, (2 sc, inc) * 2 (32)

Circle the foot on the plastic and

cut two plastic insoles. IN

I used the quality of plastic

ordinary plastic lids for

cans.

Change thread to Nako Lily cream

colors. Cut off the white thread, fasten

and hide.

5 row: for the front half of the loop

knit: 32 sc

6-7 row: 32 sc

8 row: 6 sc, (dec, 1 sc) * 6, dec, 6 sc (25)

9 row: 25 sc

10 row: 6 sc, 7 dec, 5 sc (18)

We insert the plastic insole into

foot:

11-20 row: 18 sc

21 row: (1 sc, dec) * 6 (12)

We stuff the leg tightly enough.

The tighter we pack, the more stable

there will be a bear.

Insert a disc between 20 and 21 rows

with a cotter pin on the side of the leg. About

the cotter pin can be

read at the beginning of mk.

22 row: dec * 6 (6)

23 row: dec to the end

We knit the second leg in the same way,

we only insert the cotter pin with

the opposite side of the leg. Here

we got such legs:

Hands (2 pcs):

1st row: dial 2 CH and knit in

second loop from hook 6 sc (6)

Continue knitting in a circle.

2nd row: inc * 6 (12)

3rd row: (inc, 3 sc) * 3 (15)

4-5 row: 15 sc

6 row: 4 ss, 11 sc (15)

7 row: 6 sc, 2 dec, 5 sc (13)

8 row: 6 sc, dec, 5 sc (12)

9-17 row: 12 sc

18 row: dec * 6 (6)

We fill our hand tightly. By hands

give the shape of the fold where we had

connecting posts.

Since our hand is narrow enough,

first, insert the disk from above:

And then between rows 17 and 18

cotter pin:

19 row: subtract to the end.

We knit the second hand in the same way:

Torso, head, neck:

1st row: dial 2 CH and knit in

second loop from hook 6 sc (6)

Continue knitting in a circle.

2nd row: inc * 6 (12)

3rd row: (sc, inc) * 6 (18)

4th row: (2 sc, inc) * 6 (24)

5 row: (3 sc, inc) * 6 (30)

6 row: (4 sc, inc) * 6 (36)

7 row: (5 sc, inc) * 6 (42)

8 row: (6 sc, inc) * 6 (48)

9th row: (7 sc, inc) * 6 (54)

10 row: (8 sc, inc) * 6 (60)

Between 8 and 9 rows of the trunk

insert the cotter pin from the leg:

Attention: since the toy fits on

spirals, it is possible that with one

side of the leg (arm or eye)

will need to be omitted or

raise. So that the legs (arms and eyes)

were on the same level.

From the inside we put on

cotter pin disc:

And we twist it very, very tight

cutters “antennae” from the cotter pin. Than

the tighter you twist, the more stable

Bear will stand.

Exactly parallel, with

opposite side of the torso

insert the cotter pin of the second leg:

And we fix it in the same way as the first leg.

We got the following legs:

11-20 row: 60 sc

21 row: (18 sc, dec) * 3 (57)

22 row: 57 sc

23 row: (17 sc, dec) * 3 (54)

24 row: 54 sc

25 row: (16 sc, dec) * 3 (51)

26 row: (15 sc, dec) * 3 (48)

27 row: (6 sc, dec) * 6 (42)

We fill the body tightly with filler.

Next, we attach the handles. At the level 26-27

rows, exactly over the legs, insert

cotter pins from handles:

Like the legs, we twist the “antennae” from

cotter pin with pliers:

28 row: (5 sc, dec) * 6 (36)

29 row: (4 sc, dec) * 6 (30)

30 row: (3 sc, dec) * 6 (24)

31 row: (sc, inc) * 12 (36)

32 row: (2 sc, inc) * 12 (48)

33 row: (3 sc, inc) * 12 (60)

34 row: (4 sc, inc) * 12 (72)

35-40 row: 72 sc

41 row: (10 sc, dec) * 6 (66)

42 row: (9 sc, dec) * 6 (60)

43 row: (8 sc, dec) * 6 (54)

44 row: (7 sc, dec) * 6 (48)

Insert between 42 and 43 rows eyes.

There should be

distance of 6 loops or 3 cm:

45 row: (6 sc, dec) * 6 (42)

46 row: (5 sc, dec) * 6 (36)

47 row: (4 sc, dec) * 6 (30)

48 row: (3 sc, dec) * 6 (24)

49 row: (2 sc, dec) * 6 (18)

50 row: (sc, dec) * 6 (12)

51 row: dec * 6 (6)

52 row: dec to the end.
Straighteners:

Needle with thread for knitting (color

the bear itself), we introduce on the neck,

in the middle, as shown in the photo:

We fix the thread and display it near

outer corner of the right eye:

Slightly tighten, then grab

one loop and re-insert the needle and

we display it on the neck. Slightly tighten.

Grab the loop on the neck again and

remove the needle near the outer corner left eye:

You can also repeat the tightening, but

you need to pull down slightly. A thread

cut and hide.

We got this form muzzles:

The eyes seem to be slightly depressed.

Nose:

We knit with Alize Softy white yarn:

1st row: dial 2 CH and knit in

second loop from hook 6 sc (6)

Continue knitting in a circle.

2nd row: inc * 6 (12)

3rd row: (sc, inc) * 6 (18)

4th row: inchdc * 3, 6 sc, inchdc * 3, 6 sc (24)

5-6 row: 24 sc

Cut the thread, leaving 30 cm for

sewing.

Having counted two rows from above on the nose,

insert the nose:

On the inside, spout

fix:

We attach the nose to the

muzzle:

We carefully sew on our nose:

At the end, the spout needs to be slightly filled:

Below, in the middle of the nose, we

we make a slight tightening, as shown in

Our muzzle is ready:

Ears (2 pcs):

1st row: dial 2 CH and knit in

second loop from hook 6 sc (6)

Continue knitting in a circle.

2nd row: inc * 6 (12)

3rd row: (sc, inc) * 6 (18)

4th row: (2 sc, inc) * 6 (24)

5-6 row: 24 sc

Cut the thread, leaving 30 cm for sewing.

Fold the ear in half and

sew to the head, from about

center counting 4 rows:

From the inside of the ear, too sew on:

Sew the second ear in the same way:

Tail:

1st row: dial 2 CH and knit in

second loop from hook 6 sc (6)

Continue knitting in a circle.

2nd row: inc * 6 (12)

3rd row: (sc, inc) * 6 (18)

4-5 row: 18 sc

Cut the thread, leaving 30 cm for sewing.

We attach with English clubs

behind our tail and sew on:

At the end, fill the tail lightly, and we sew to the end:

Well, our bear is ready!

It remains to tie a kit for him clothes …

Set of clothes:

First of all, I want to say

when we knit clothes we always need it

try on. Otherwise it might turn out

so that the kit turns out to be large or

small. Everyone knits differently: someone

freely, someone denser. If a

feel that nevertheless, for example,

coat is not enough, “step back” a little

from the scheme proposed in this

master class, and add extra

loop. In general, a flight of fantasies and

forward…

Let’s start this kit with a hat.

Beanie:

(YarnArt Mink white yarn,

yarn Alize Superlana klasik red

colors, stocking needles No. 2.5 – 5 pieces,

scissors)

With a white thread we collect 70

loops and distribute them on 4 knitting needles

(17 + 18 + 17 + 18).

Then we knit in a circle.

1 row: 70 persons

2-5 row: (1 person, 1 out) * 35 (70)

Change the thread to red. White

cut off, fix and hide.

6-38 row: 70 persons

39 row: (5 persons, dec) * 10 (60)

40-43 row: 60 persons

44 row: (4 persons, dec) * 10 (50)

45-48 row: 50 persons

49 row: (3 persons, dec) * 10 (40)

50-53 row: 40 persons

54 row: (2 persons, dec) * 10 (30)

55-58 row: 30 persons

59 row: (1 persons, dec) * 10 (20)

60-63 row: 20 persons

In the next row, using

hook, remove all loops from the needles by one a thread.

Pull off the top of the cap.

Turn the hat on the wrong side

side and tie this thread tight knot.

Attention: do not pull the thread too much

otherwise it may break.

Pompon:

(Nako Mohair Delicate white yarn

colors, hook, scissors).

We take a white thread and wind it on

fingers in a thick layer.

Then we thread the hook between

middle and ring finger:

We grab the cut off thread, length

30 cm.And pull it to another

side. With this thread we tie our bunch.

Next, remove the bundle from the hand. AND

cut the threads on the sides with scissors.

It turned out like this pompom:

We begin to trim it. Cut off

threads about 1.5 cm to our

the pompom was tight. The threads by which

tied our pom-pom, do not touch.

For the remaining white threads

tie the pompom to our

hat. We put the hook through

loops at the end of the cap and

grab the white thread:

We do the same with the second end

white thread. We pass it with

the opposite side.

We tie our threads to a strong

knot and cut to length for a pompom:

Our hat is ready:

Coat:

(YarnArt Mink white yarn, yarn Alize Superlana klasik red colors, circular needles No. 2.5 – 2 pieces, scissors, buttons – 3 pcs)

We begin to knit a coat with “raglan”,

back rows. According to the rules

knitting: first outer loop

just take off, the last

we knit purl. When

knitting, we will observe this too rule.

Cast on 58 stitches.

1 row: k, 1 knit, 4 purl, 7 knit, yarn, 1

knit, yarn, 7 knit, yarn, 1 knit, yarn,

14 knit, yarn, 1 knit, yarn, 7 knit, yarn, 1 knit, yarn, 7 knit, 4 purl, 1 knit, to (66)

In the next row we will knit button hole.

2nd row: k, 1 purl, 1 knit, close 2 loops,

55 purl, 4 knit, 1 purl, k (64)

3 row: k, 1 knit, 4 purl, 8 knit, yarn, 1 knit, yarn, 9 knit, yarn, 1 knit, yarn, 16 knit, yarn, 1 knit, yarn, 9 knit, yarn, 1 knit, yarn, 8 knit, 1 purl, 2 nakida, 1 purl, 1 knit, k (74)

4th row: k, 1 purl, 4 knit, 62 purl, 4 knit, 1 purl, k (74)

5 row: k, 1 knit, 4 purl, 9 knit, yarn, 1 knit, yarn, 11 knit, yarn, 1 knit, yarn, 18 knit, yarn, 1 knit, yarn, 11 knit, yarn, 1 knit, yarn, 9 knit, 4 purl, 1 purl, k (82)

6 row: k, 1 purl, 4 knit, 70 purl, 4 knit, 1 purl, k (82)

7 row: k, 1 knit, 4 purl, 10 knit, yarn, 1 knit, yarn, 13 knit, yarn, 1 knit, yarn, 20 knit, yarn, 1 knit, yarn, 13 knit, yarn, 1 knit, yarn, 10 knit, 4 purl, 1 purl, k (90)

8 row: k, 1 purl, 4 knit, 78 purl, 4 knit, 1 purl, k (90)

9th row: k, 1 knit, 4 purl, 11 knit, yarn, 1 knit, yarn, 15 knit, yarn, 1 knit,yarn, 22 knit, yarn, 1 knit, yarn, 15 knit, yarn, 1 knit, yarn, 11 knit, 4 purl, 1 purl, k (98)

10 row: k, 1 purl, 4 knit, 86 purl, 4 knit, 1 purl, k (98)

11 row: k, 1 knit, 4 purl, 12 knit, yarn, 1 knit, yarn, 17 knit, yarn, 1 knit, yarn, 24 knit, yarn, 1 knit, yarn, 17 knit, yarn, 1 knit, yarn, 12 knit, 4 purl,1 purl, k (106)

12 row: k, 1 purl, 1 knit, close 2 loops, 94 purl, 4 knit, 1 purl, to (104) (In this a row of hole for a button)

13th row: k, 1 knit, 4 purl, 13 knit, yarn, 1 knit, yarn, 19 knit, yarn, 1 knit, yarn, 26 knit, yarn, 1 knit, yarn, 19 knit, yarn, 1 knit, yarn, 13 knit, 1 purl, 2 yarns, 1 purl, 1 knit, k (114)

14th row: k, 1 purl, 4 knit, 102 purl, 4 knit, 1purl, k (114)

15 row: k, 1 knit, 4 purl, 14 knit, 23 loops transfer to an additional spoke, 28 knit, 23 stitches transfer to extra knitting needle, 14 knit, 4 purl, 1 knit, k (68)

16 row: k, 1 purl, 4 knit, 14 purl, 5 yarns, 28 purl, 5 yarns, 14 purl, 4 knit, 1 purl, k (78)

We make nakida like this thread loops:

17 row: k, 1 knit, 4 purl, 7 knit, inc, (12 knit, inc) * 4, 6 knit, 4 purl, 1 knit, k (83)

18 row: k, 1 purl, 4 knit, 71 purl, 4 knit, 1 from, to (83)

These are the holes for the sleeves we have turned out:

19 row: k, 1 knit, 4 purl, 8 knit, inc, (13 knit, inc) * 4, 6 knit, 4 purl, 1 knit, k (88)

20 row: k, 1 purl, 4 knit, 76 purl, 4 knit, 1 from, to (88)

21 row: k, 1 knit, 4 purl, 9 knit, inc, (14 knit, inc) * 4, 6 knit, 4 purl, 1 knit, k (93)

22 row: k, 1 purl, 1 knit, 2 loops close, 81 purl, 4 knit, 1 out, to (91) (button hole in this row)

23 row: k, 1 knit, 4 purl, 81 knit, 1 purl, 2 nakida, 1, purl, 1 knit, k (93)

24,26,28,30 row: k, 1 purl, 4 knit, 81 purl, 4 knit, 1 purl, k (93)

25,27,29 row: k, 1 knit, 4 purl, 81 knit, 4 purl, 1 knit, k (93)

31 row: close all loops.

Cut the red thread, fix and hide.

32 row: attach a white thread and we knit by the front half of the loop:

93 sc, CH, turn (93)

33-35 row: 93 sc, CH, turn (93)

Row 36: 93 sc

Sleeve:

We attach a red thread and knit:

1 row: on our extra spoke

there are 23 loops and we also

we get 9 loops from the bottom of the sleeves,

knitting them with knit.

So we have all the loops

distributed on 4 knitting needles, 8 each

loops on each.

Row 2-11: 32 knit

Change the thread to white. Red

cut, fasten and hide.

12-14 row: 32 knit

15 row: close all loops.

Similarly, we knit the second sleeve:

Collar:

Attach a white thread from above

coat, from the purl side, like

shown in the photo:

and we knit:

1st row: 52 sc

2nd row: (9 sc, inc, 10 sc, inc) * 2, 9 sc, inc (57)

3rd row: inc, 10 sc, (inc, 11 sc, inc, 10 sc) * 2 (62)

4th row: (11 sc, inc, 12 sc, inc) * 2, 11 sc, inc (67)

5 row: inc, 12 sc, (inc, 13 sc, inc, 12 sc) * 2 (72)

From the knit side, opposite

buttonholes, sew on 3

buttons.

Our coat is ready:

Bag:

(red YarnArt Jeans yarn,

yarn yarn Nako Mohair Delicate

white, hook number 2.5, needle, scissors)

1st row: dial 2 ch and knit in second loop from 6 sc hook

2 row: 2 sc in 1 loop – 6 times (12)

3rd row: 2 dc in 1 loop – 12 times (24)

4th row: (1 dc, 2 dc in 1 loop) * 12 (36)

5 row: (2 dc, 2 dc in 1 loop) * 12 (48)

6 row: (3 dc, 2 dc in 1 loop) * 12 (60)

7 row: (4 dc, 2 dc in 1 loop) * 12 (72)

8 row: behind the back half of the loop: (5 dc, 2 dc in 1 loop) * 12 (84)

9 row: (6 dc, 2 dc in 1 loop) * 12 (96)

10-27 row: 96 dc

You can tie the bag higher

while adding rows.

Lace:

Knit lace with white thread – Nako

Mohair Delicate. Leaving about 30 see, do CH:

Then that thread we left behind

we throw on the hook:

And we stretch the main thread through

formed 2 loops:

Then again the remaining thread

sketch out, and again the main

stretching out. And so we knit a lace up

the length you need. I managed

150 stitches or long

approx. 45 cm.

We thread the lace at the top

pouch. I was stepping back from the top edge

2 rows, but for the top

the pouch looked more beautiful

retreat better 3-4 rows. Lace

thread through every 5 loops:

Next, we make 2 small pom-poms,

as for a hat:

And with a needle we sew them to

ends of the lace:

Our bag is ready:

We dress our bear and admire

result!