Natali Doll Amigurumi Free Pattern

I continue to share amigurumi free patterns. In this article, natali doll amigurumi free pattern is waiting for you.

The size of the finished doll is 20 cm. 

This pattern contains step by step crochet instructions. 

the doll itself 

(+ attaching hair and embroidering eyes) and knitting 

crochet dress, boots and teddy bear). 

Materials

– Hook #2.5mm 

– Cotton or acrylic yarn 200m / 50g in different colors: 

beige, white, coffee (hair), black, dark grey, light grey, red) 

– Muline threads of different colors for embroidery of the face (black, 

white, grey-blue, brown, pink) 

– Wires for the frame (copper braided wire with a diameter of 1.5 mm) 

– Pliers (for cutting and twisting the frame) 

– Durable cardboard (1010 g/m2) for shoe soles 

– Needle with a large eye for sewing parts + a device for threading the needle 

– Stuffing, such as holofiber or synthetic luff 

– Pliers for stuffing parts 

– Adhesive plaster on a fabric basis (for winding the ends of the frame) 

– plush lightweight yarn (for winding around the leg frame) 

– Scissors and pins 

Abbreviations 

CH-chain 

SC – single crochet 

DC – double crochet 

DEC – decrease 

INC – increase 

PATTERN

Arms 

flesh color 

1 Row – 6 SC into magic ring (6) 

2-12 row – 6 SC (6) 

13 Row – 1DEC, 4SC (5) 

Cut off the thread. 

Legs 

flesh color 

1st row – 7 SC into magic ring (7) 

2-6 row – 7SC (7) 

7th row – 1DEC, 6SC (8) 

8-20 row – 8SC (8) 

Cut the yarn on the right leg. 

Change the color on the left leg to white and crochet the last two stitches with white yarn, do not cut the yarn 

Body 

Continue crocheting with white yarn from the second leg. 

1 row – 3CH, 8SC on the right leg, 3 SC on the chain, 8 SC on the left leg, 3SC on the second side of the chain (22) 

2-row (not complete) – crochet in a spiral, do not knit the last 2 columns, put the marker on – this is the middle of the body (22) 

3rd row – 4SC, 1DEC, 9SC, 1DEC, 5SC (20) 

4 row – 20SC (20) 

5 row – 4SC, 1DEC, 8SC, 1DEC, 4SC (18) 

6 row – 18SC (18) 

Change color to beige 

7th row – 3SC,1DEC, 7SC, 1DEC, 4SC(16) 

8-13 row – 16SC (16) 

14 row – 4SC, 5SC on the first hand, 

8SC, 5SC second hand, 4SC (26) 

15 row – 4SC, 3DEC, 7SC, 3DEC, 3SC 

(twenty) 

At this stage, we need to insert the frame into the body of the doll. 

Frame 

You need to prepare 2 pieces of wire for the frame of the desired size (see photo). Twist one part of the long piece, forming a “spine”, leaving the ends for the legs. Wrap the edges of the leg frame with adhesive tape (so they don’t pierce through the knitted fabric) 

Now we need to wind the frame of the legs with plush yarn (to give volume to the legs) (see photo). 

Then insert the hand wire into the “spine” at the desired level. 

Make one turn (so that the frame of the hands does not move). 

Try on the length of the wire with the length of the brackets so that the frame is symmetrical and not too long (at this point you can trim the ends of the frame with pliers) 

Wrap the ends of your arms with adhesive tape (as you did for the legs) 

The frame is ready. 

Gently insert the frame, pulling your arms and legs over the frame like stockings. 

At this stage, you should fill the body to the required volume. 

(don’t stuff your arms and legs) 

It is convenient to use pliers for this. 

Bend the ends of the legs (= legs) with pliers, bend the wire at the knees, feet and hands. 

middle 

Shoulders and neck 

We continue to knit the body 

16 row – 3SC, 2DEC, 6SC, 2DEC, 3SC 

(16) 17th row – 8DEC (8) 

At this stage fill the shoulders and upper body. 

18 row – 

1SC,1DEC, 2SC, 

1DEC, 1SC (6) 19- 

20 row – 6SC (6) 

1 row – 6INC (12) 

2nd row – 12INC (24) 

3 row – (1INC, 1SC) x12 (36) 

4-15 row – 36SC (36) 

Head 

Change color to hair color 

16 row – (1DEC, 4SC) x6 (30) 

17 row – (1DEC, 3SC) x6 (24) 

18 row – (1DEC, 2SC) x6 (18) 

Fill the head fairly tight and evenly. 

19 row – (1DEC, 1SC) x6 (12) 

20 row – 6DEC (6) 

Add a drawstring to the top of the head, tighten the left seams, leaving a long thread (approximately equal to the length of the hair) 

Face 

The most important point is to determine the correct proportions of the location of the eyes. 

Determine the middle of the face by eye – this is a vertical line. 

The horizontal line is between the 8th and 9th rows of the head. 

Between the points for the eyes (yellow dots in the “holes”) there should be 4 “holes” (see photo) 

8 row 

9 row 

When the starting points are determined, embroider the eyes with a floss thread (from 6 threads), alternating colors. 

I tried to carefully show all the steps in the photos. You can determine the length of the stitches and the overall size of the eyes by looking closely at the photographs, counting by squares. 

1. Embroider pupils in black, but do not cut the thread, leave a rather long end in the temple area (we will need it to embroider eyelashes later) 

2. Embroider the iris in grey-blue only on both sides of the pupil. Leave the left thread at the back of the head and secure with a knot. 

(Later there will be hair and the knot will be invisible) 

3. Embroider white on gray-blue. And to make the seams are the highlights. 

One long illumination along the pupil and one short illumination along the iris (see photo). 

Fasten the thread on the back of the head in the same way. 

4. Go back to the black thread we left. Gently insert the needle into the eye 

(so that there are no seams near the temple) and make a few stitches along the upper eyelid and one seam along the lower eyelid. 

Repeat the same for the second eye. 

6 threads for embroidering eyelashes is too much, 3 is enough. 

Here’s why: next, remove the thread in the middle of the lower eyelid and divide the threads in half. 

At the same time, 3 threads out of 6 leave for a while, and 3 threads are inserted into the needle and the lower (2 pcs) and upper (4 pcs) eyelashes are embroidered near this eye. Fasten the thread at the back of the head. 

1. Embroider eyebrows with brown thread. 

2. Sew the nose with the same yarn you used for the body (about 3 stitches). 

3. Embroider the mouth with pink thread. 

The face is ready. 

In the photo you can see all the nodes on the back of the head. 

Blush on the cheeks with pastel or blush. 

Hair 

Start by marking as for the eyes. From the middle line to each side, count 6 “holes” and put a marker in the 7th (yellow) one. 

Thus, there will be 12 “holes” between the right and left markers (silver pins). 

To cut the hair threads faster, I take a book of the right size, wind it across the entire width with yarn, and then cut along the cover. 

Thus, we quickly get threads of the same length. 

From each of the markers you need to lay a hairline. You can see in the photo, you need to make 4 stitches every 2 rows. 

Now fill the entire back of the head with two rows of hair loops. 

Each row of hair loops = 4 rows of knitted head fabric. Insert hook from bottom to top. 

First all the sides, then the bottom row, and then the top row. In the photo you can see all the stages: 

Now work one row of stitches along the 16th row of the head (the first row of hair on the head). Insert hook from bottom to top. 

Thus, fill the entire crown of the head with hair. Make a hair loop in each stitch of head fabric at the top in a spiral. But insert the hook from left to right. (See photo) 

4 SC into magic ring. 

Leave long enough thread for sewing. 

Sew the ears to the head at the edging, you can see this in the photo. 

Ears 

Start with white 

1 row – chain 26 CH 

Dress 

2 row – from the 5th loop from the hook 22 DC (22) 

Change color to red 

3rd row – 3SC, 3CH (skip 4 stitches), 8SC, 3CH (skip 4 stitches), 3SC (20) 

4 row – 3SC, 2SC in a chain, 8SC, 2SC in a chain, 3SC (18) 

5 row – 18SC (18) 

Change the color to white (don’t cut the red thread) 

6 row – 18SC (18) 

Cut off the white yarn and return to the beginning of the row where you left the red yarn. Next we knit with red yarn: 

7 row – (3DC in 1 loop, 2DC in 1 loop) x8, (2DC in 1 loop) x2 (44) 

Then we crochet in a circle without turning the crochet 

8-11 row – (2DC only for the front loop, 2DC only for the back loop) x11 (44) 

white color 

12 row – 44DC 

Fasten all the threads, hide all the ends. 

Sew on a button in the first row. 

Boots 

Black color 

5CH 

Crochet in a spiral 

Starting from the 2nd loop from the hook: 

1 row – 3SC, 3SC in 1 loop, 2 SC, 1 INC (10) 

2nd row – 1INC, 2SC, 3INC, 2SC, 2INC (16) 

3 row (not complete) – 1SC, 1INC, 3SC, 1INC, 1SC (18) 

Dark gray color 

4 row – 18SC behind the back wall of the loop (18) 

5 row – 18SC (18) 

At this stage, it is necessary to cut insoles of suitable size from durable cardboard and glue them on the inside of the sole. 

6 row – 5SC, 4DEC, 5SC (14) 

7th row – 3SC, 4DEC, 3SC (10) 

8-9 row – 10SC (10) 

10row -10DC 

Fasten, cut the yarn and hide the end. 

bear 

Legs-body-head (one piece) 

Grey colour 

1 row – 6SC into magic ring (6) 

2 row – (1INC, 2SC)x2 (8) 

3-5 row – 8SC (8) 

Cut off the yarn. Knit the second leg in the same way, but do not cut the yarn, continue to crochet: 

6 row – 8SC along the first leg, 8SC along the second leg (16) 

7th row – 3SC, 1DEC, 6SC, 1DEC, 3SC (14) 

8 row – 3SC, 1DEC, 5SC, 1DEC, 2SC (12) 

9 row – 2SC, 1DEC, 4SC, 1DEC, 2SC (10) 

10 row – 2SC, 1DEC, 3SC, 1DEC, 1SC (8) 

11 row – 1SC, 1DEC, 2SC, 1DEC, 1SC (6) 

fill the body 

12 row – 6INC (12) 

13 row – (1INC, 1SC) x6 (18) 

14 row – (1INC, 5SC) x3 (21) 

15-18 row – 21SC (21) 

19 row – (1DEC, 5SC) x3 (18) 

20 row – (1DEC, 1SC) x6 (12) 

fill the body 

21 row – 6DEC (6) 

Cut the yarn, tighten and hide the end of the thread. 

Hands (2pcs) 

1 row – 6SC into magic ring (6) 

2-5 row – 6SC (6) Fill a little, leave the thread for sewing. 

Paws (2pcs) 

6 SC into magic ring (6) 

Cut the yarn, leave the thread for sewing. 

muzzle 

White color 

11 DC into magic ring (11) 

Cut the yarn, leave the thread for sewing. 

Sew muzzle, hands, paws 

Embroider eyes and nose with black thread. 

You can tie a ribbon to make the bear more beautiful 

error: Content is protected !!