Realistic Doberman Dog Amigurumi Free Pattern

I am sharing wonderful and unique amigurumi dog patterns with you for free. Amigurumi doberman dog pattern is with you.

Materials and tools:  

1. The main yarn of two colors: black (approx. 60 g) and brown (approx. 15 g) (I used yarn Svetlana of the Semenov factory. Structure: 50% acrylic, 50% wool. The length of a thread is 250m. Weight of a skein is 100 g)  

2. A pink yarn for the tongue (I used Kartopu Amigurumi. Structure: 51% acrylic, 49% cotton. The length of a thread is 130 m. weight of a skein is 50 g)  

3. Baking polymer clay of black and white colors for the eyes and nose and a glossy varnish for a clay.  

4. A copper wire 1,5 mm in diameter (approx. 2,5 m);  

5. A wire for beading (approx. 1m);  

6. The hook № 1,25 Clover, or any other hook suitable in size to the chosen yarn.  

7. Stuffing.  

8. An adhesive plaster on a fabric base 1 cm wide.  

9. A long needle with a big eye for tightenings.  

10. A strong thread for tightenings.  

Abbreviations  

ch = chain  

inc = increase (2sc in 1 stitch)  

dec = decrease (crochet 2 sc together)  

sc = single crochet  

hdc = half double crochet  

dc = double crochet  

sl st = slip stitch  

This crochet pattern does not contain crocheting lessons, it suits for the people who can crocheting.  

Front legs (2 pcs)  

The legs are crocheted similarly, without any difference for left and right.  

You can not align the marker.  

Begin crocheting with a brown color  

1 rnd: 6sc in the magic ring = 6st  

2 rnd: 6inc = 12st  

3 rnd: (3sc, 1inc) х 3 = 15st  

4-6 rnd: 15sc = 15st (3rows)  

7 rnd:(2sc, 1dec) х 3, 3sc = 12st  

Cut a piece of wire approx. 20 cm long.  

Make a loop at one end and wind it with an adhesive plaster. Insert a wire in the leg and stuff it a little. Further continue crocheting around a wire.  

8 rnd: (2sc, 1dec) х 3 = 9st  

9 rnd: 1dec, 7sc = 8 st  

10-16 rnd: 8sc = 8st (7rows)  

Change the color to black  

17-19 rnd: 8sc = 8st (3rows)  

Further we will crochet a joint.  

20 rnd: 3inc hdc, 5sc = 11st  

21 rnd: 11sc = 11st  

22 rnd: 3dec, 5sc = 8st  

Stuff a joint rather tight  

23-24 rnd: 8sc = 8st (2rows)  

25 rnd: 1inc, 7sc = 9st  

26 rnd: (2sc, 1inc) х 3 = 12st  

27 rnd: 12sc = 12st  

28 rnd: (3sc, 1inc) х 3 =15st  

29-31 rnd: 15sc = 15st (3rows), fasten off and cut the yarn.  

Stuff the upper part of the leg just a little to underline its shape  

Hindlegs (2 pcs)  

The legs are crocheted similarly, without any difference for left and right.  

You can not align the marker.  

Begin crocheting with brown color  

1 rnd: 6sc in the magic ring = 6st  

2 rnd: 6inc = 12st  

3 rnd: (3sc, 1inc) х 3 = 15st  

4 rnd: 15sc = 15st  

5 rnd: 13sc, 1dec = 14st  

6 rnd: 14sc = 14st  

7 rnd: 12sc, 1dec = 13st  

8 rnd: 13sc = 13st  

9 rnd: 11sc, 1dec = 12st  

Cut a piece of wire approx. 40 cm long. Make a loop at one end and wind it with an adhesive plaster. Insert a wire in the leg and stuff it. Further continue crocheting around a wire.  

10 rnd: 10sc, 1dec = 11st  

11 rnd: 9sc, 1dec = 10st  

12 rnd: 8sc, 1dec = 9st  

Change the color to black  

13-16 rnd: 9sc = 9st (4rows)  

Further we will crochet a joint.  

17 rnd: 3inc hdc, 6sc = 12st  

18 rnd: 12sc = 12st  

19 rnd: 3dec, 6sc = 9st  

Stuff a joint rather tight  

20-24 rnd: 9sc = 9st (5rows)  

25 rnd: (2sc, inc) х 3 = 12st  

26 rnd: (3sc, inc) х 3 = 15st  

27 rnd: (4sc, inc) х 3 = 18st  

28 rnd: (5sc, inc) х 3 = 21st  

29-33 rnd: 21sc = 21st (5rows), fasten off and cut the yarn  

Mark the 10th stitch from the marker, we begin crocheting in this leg in the body from this stitch  

Body.  

Begin crocheting from the tail.  

The marker goes along the middle of the belly.  

Begin crocheting with a black color.  

1 rnd: 5sc in the magic ring = 5st  

2 – 3 rnd: 5sc = 5st (2rows)  

4 rnd: 4sc, inc = 6st  

5 rnd: 6sc = 6st  

6 rnd: 5sc, 1inc = 7st  

7 rnd: 7sc = 7st  

Take a piece of wire 30 cm long, wind one end with an adhesive plaster, insert it in the tail.  

8 rnd: 6sc, 1inc = 8st  

9 rnd: 8sc = 8st  

10 rnd: 7sc, 1inc = 9st  

11 – 12 rnd: 9sc = 9 st (2rows)  

For not mixed tail crochet 8 more rows, 9 sc in each row  

13 rnd: 9inc = 18st  

14 rnd: (2sc, 1inc) х 6 = 24st  

15 rnd: (3sc, 1inc) х 6 = 30st  

16 rnd: (4sc, 1inc) х 6 = 36st  

17 rnd: (5sc, 1inc) х 6 = 42st  

In the next row crochet in the hindlegs, to do this put the details by the right side to each other and beginning from the 10th stitch from the marker crochet the details grasping two edges (simultaneously grasping the stitches of the body and the stitches of the leg).  

18 rnd: 1sc, 10sc for the both edges, grasping the stitches of the body and the stitches of the right hindleg, 20sc, 10sc for the both edges, grasping the stitches of the body and the stitches of the left hindleg, 1sc = 42st  

Twist the wires of the tail and the legs together and wind with an adhesive plaster.  

19 rnd: 1sc – along the body, 10sc – along the outer side of the leg, 1dec (1 sc of the leg and 1 sc of the back), 18sc – along the back, 1dec (1 sc of the back and 1 sc of the leg), 9sc – along the outer side of the leg, 1 dec = 41st  

Further it is necessary to align the marker, if necessary crochet shift stitches.  

20 rnd: 1dec, 39sc = 40st  

21 rnd: 40sc = 40st  

Stuff the upper part of the leg. Further stuff the body rather tight in the course of crocheting.  

22 rnd: (1dec, 1sc) х 3, 22sc, (1sc, 1dec) х 3 = 34st  

23 rnd: 34sc = 34st  

24 rnd: (1dec, 1sc) х 2, 22sc, (1sc, 1dec) х 2 = 30st  

25 rnd: 30sc = 30st  

26 rnd: (1sc, 1inc) х 3, 18sc, (1inc, 1sc) х 3 = 36st  

27 rnd: 2inc, 32sc, 2inc = 40st  

28 – 29 rnd: 40sc = 40st (2rows)  

30 rnd: (1sc, 1inc) х 3, 28sc, (1inc, 1sc) х 3 = 46st  

31 rnd: 46sc = 46st  

32 rnd: (1sc, 1inc) х 3, 34sc, (1inc, 1sc) х 3 = 52st  

33 – 37 rnd: 52sc = 52st (5rows)  

In the next row we will crochet in the front legs. Put the leg by the right side to the body by the toes forward. Crochet in the legs, right one – beginning from the last crocheted stitch, left one – from the 8 th stitch from the marker.  

38 rnd: (1sc, 1dec) х 2, 8sc for the both edges, grasping the stitches of the body and the stitches of the right front leg, 24sc, 8sc for the both edges, grasping the stitches of the body and the stitches of the left front leg, (1dec, 1sc) х 2 = 46st  

39 rnd: 4sc along the breast, 7sc along the outer side of the leg, 24sc along the back, 7sc along the outer side of the leg, 4sc along the breast = 46st  

Twist wires of the front legs with wire of the body together and wind with an adhesive plaster.  

40 rnd: (1sc, 1dec) х 2, 3sc, 1dec, 22sc, 1dec, 3sc, (1dec, 1sc) х 2 = 38st  

41 rnd: 7sc, 1dec, 20sc, 1dec, 7sc = 36st  

42 rnd: 12sc, 8 ch, skip 12 sc, 12sc = 32st  

Take out a wire in the received opening.  

43 rnd: 8sc, 2dec, 8sc along the chain, 2dec, 8sc = 28st  

44 rnd: (2sc, 1dec) х 7= 21st  

45 rnd: (1sc, 1dec) х 7 = 14st  

46 rnd: 7dec = 7st  

Tighten the opening. Fasten off and cut the yarn  

Neck.  

Crochet 22 sc round a wire beginning from the middle of the breast. The marker goes along the middle of the neck at the front part.  

Crochet with a black color.  

1 rnd: 4sc along the chain, inc, 10sc, inc, 4sc along the chain  

2 – 4 rnd: 22sc = 22st (3rows)  

5 rnd: 4sc, 1dec, 10sc, 1dec, 4sc = 20st  

6– 8 rnd: 20sc = 20st (3rows)  

9 rnd: 4sc, 1dec, 8sc, 1dec, 4sc = 18st  

10-12 rnd: 18sc = 18st (3rows)  

13 rnd: (2sc, 1inc) х 6 = 24st  

Fasten off and cut the yarn. Stuff the neck.  

Tongue  

Crochet with a pink color.  

Crochet 15 ch. Crochet along the both sides of the chain.  

1 rnd: 7sc, 4hdc, 2dc, 4dc in 1 st, 2dc, 4hdc, 7sc = 30st  

2 rnd: 8sc, 5hdc, 4inc hdc, 5hdc, 8sc = 34st  

In the course of crocheting of the next row it is necessary to insert a wire for beading between the rows  

3 rnd: 13sc, (1sc, inc) х 4, 13sc = 38st  

Lower lip  

Crochet with a black color.  

You can not align the marker.  

1 rnd: 6sc in the magic ring = 6st  

2 rnd: (1sc, 1inc) х 3 = 9st  

3 rnd: 2inc, 2sc, 2inc, 3sc = 13st  

4 – 11 rnd: 13sc = 13st (8rows)  

Fasten off and cut the yarn. Do not stuff the detail.  

Head  

The marker goes along the middle of the upper part of the head. It is necessary to align the marker, if necessary crocheting shift stitches.  

Begin crocheting with a brown color. We will crochet a black stripe from above the muzzle. The stitches which you should crochet with a black color will be marked in the text by a bold type.  

Begin with a brown color.  

1 rnd: 6sc in the magic ring = 6st  

2 rnd: 1inc х 5, inc = 12st  

3 rnd: inc, (1sc, inc) х 4, inc, 2sc = 18st  

4 rnd: 2 sc, 2 inc, (1sc, 1inc) х 2, 2sc, (1inc, 1sc) х 2, 2inc, 2sc = 26st  

5 rnd: 2sc, 5sc, 4inc, 4sc, 4inc, 5sc, 2sc = 34st  

6 rnd: 2sc, inc, 5sc, (1inc, 1sc) х 4, 2sc, (1sc, 1inc) х 4, 5sc, inc, 2sc = 44st  

7 rnd: 2 sc, 11sc, (1sc, 1inc) х 4, 2sc, (1inc, 1sc) х 4, 11sc, 2sc = 52st  

8 rnd: 2sc, 1inc, 46sc, 1inc, 2sc = 54st  

9 rnd: 2sc, 16sc, 1dec, 14sc, 1dec, 16sc, 2sc = 52st  

10 rnd: 2sc, 16sc, 1dec, 12sc, 1dec, 16sc, 2sc = 50st  

11 rnd: 2sc, 22sc, dec, 22sc, 2sc = 49st  

12 rnd: 3sc, 13sc, 1dec, 13sc, 1dec, 13sc, 3sc = 47st  

13 rnd: 3sc, 12sc, 1dec, 13sc, 1dec, 12sc, 3sc = 45st  

In the next row we will crochet in the lower lip – put the details by the right side to each other  

14 rnd: 3 sc, 11sc, 2dec, 2sc, 5sc for the both edges, grasping the stitches of the head and the stitches of the lower lip, 2sc, 2dec, 11sc, 3sc = 41st  

15 rnd: 3sc, 10sc, 2dec, 1sc – along the head, 8sc along not crocheted stitches of the lower lip, 1sc, 2dec, 10sc, 3sc – along the head = 40st  

16 rnd: 3inc, 9sc, 2dec, 8sc, 2dec, 9sc, 3inc = 42st  

Change the color to black, fasten off and cut the brown yarn  

17 rnd: (1sc, 1inc) х 3, 30sc, (1inc, 1sc) х 3 = 48st  

18 rnd: (2sc, 1inc) х 3, 10sc, (1sc, 1inc) х 5, 10sc, (1inc, 2sc) х 3 = 59st  

19 rnd: 59sc = 59st  

20 rnd: (3sc, 1inc) х 3, 35sc, (1inc, 3sc) х 3 = 65st  

21- 22 rnd: 65sc = 65st (2rows)  

23 rnd: 7sc, 13sc for the front loops only, 25sc, 13sc for the front loops only, 7sc = 65st  

24 – 25 rnd: 65sc = 65st (2rows)  

26 rnd: 7sc, 13sc together with the back loops of the 22 rnd, 11sc, 3 ch, skip 3 stitches, 11sc, 13sc together with the back loops of the 22 rnd, 7sc = 65st – we will insert a wire in the received opening  

27 – 30 rnd: 65sc = 65st (4rows)  

30 rnd: (9sc, dec) х 5, 10sc = 60st  

31 rnd: 4sc, dec, (8sc, dec) х 5, 4sc = 54st  

32 rnd: (7sc, dec) х 6 = 48st  

33 rnd: 3sc, dec, (6sc, dec) х 5, 3sc = 42st  

34 rnd: (5sc, dec) х 6 = 36st  

First decorate the lower lip. To do this cut a piece of wire, bend in the shape of the lip and insert in the lower lip. Sew the lip along its contour by invisible stitches to fix a wire inside. fasten with several stitches the cheeks (the dangling parts of the muzzle), so as later you can not put the stuffing inside them. The stitches should be placed there, where at the  photo you can see a yellow stripe.  

Sew the tongue in the place where the head is connected with the lower lip.  

Stuff the nose rather tight. Insert a wire from the neck in the head through the opening of 3 ch. Connect a wire of the lower jaw with a wire of the neck, wind with an adhesive plaster. Sew the head to the neck.  

Crochet the head to the end, stuffing it in the course of crocheting.  

35 rnd: 2sc, dec, (4sc, dec) х 5, 2 sc = 30st  

36 rnd: (3sc, dec) х 6 = 24st  

37 rnd: (2sc, 1dec) х 6 = 18st  

38 rnd: (1sc, 1dec) х 6 = 12st  

39 rnd: 6dec = 6st  

Tighten the left stitches.  

Ear (mixed) 2 pcs.  

2ch,  

1 rnd: 1sc, ch, turn  

2 rnd: inc, ch, turn  

3 rnd: 2sc, ch, turn  

4 rnd: inc, 1sc, ch, turn  

5 rnd: 3sc, ch, turn  

6 rnd: inc, 2sc, ch, turn  

7 rnd: 4sc, ch, turn  

8 rnd: inc, 3sc, ch, turn  

9 rnd: 5sc, ch, turn  

10 rnd: inc, 4sc, ch, turn  

11 rnd: 6sc, ch, turn  

12 rnd: inc, 5sc, ch, turn  

13 rnd: 7sc, ch, turn  

14 rnd: inc, 6sc, ch, turn  

15 rnd: 7sc, inc, ch, turn  

16 rnd: inc, 8sc, ch, turn  

17 rnd: 9sc, inc, ch, turn  

18 rnd: inc, 10sc, ch, turn  

19 rnd: 11sc, inc, ch, turn  

20 rnd: inc, 12sc, ch, turn  

21 rnd: 12sc, 2inc, ch, turn  

22 rnd: inc, 15sc, ch, turn  

23 rnd: 16sc, inc, ch, turn  

24 rnd: inc, 12sc, sl st, ch, turn  

25 rnd: skip 1st, 14sc, ch, turn  

26 rnd: 10sc, sl st, ch, turn  

27 rnd: skip 1st, 10sc, ch, turn  

28 rnd: 7sc, sl st, ch, turn  

29 rnd: skip 1st, 7sc  

Crochet along the whole edge of the ear inserting a wire between the rows.  

ch, 28sc, 1sc, 2ch, 1sc in the top of the ear, along the other side of the ear 23sc, ch, along the bottom of the ear 20sc.  

Natural ear (2 pcs)  

5ch,  

1 rnd: 4sc, ch, turn  

2 rnd: inc, 3sc, ch, turn  

3 rnd: inc, 4sc, ch, turn  

4 rnd: inc, 5sc, ch, turn  

5 rnd: inc, 6sc, ch, turn  

6 rnd: inc, 7sc, ch, turn  

7 rnd: inc, 8sc, ch, turn  

8 rnd: inc, 9sc, ch, turn  

9 rnd: inc, 10sc, ch, turn  

10 rnd: inc, 10sc, inc, ch, turn  

11 rnd: 14sc, ch, turn  

12 rnd: inc, 12sc, inc, ch, turn  

13 rnd: inc, 14sc, inc, ch, turn  

14 – 17 rnd: 18sc, ch, turn  

18 rnd: dec, 16sc, ch, turn  

19 rnd: dec, 15sc, ch, turn  

20-25 rnd: 16sc, ch, turn  

Crochet round the ear with sc inserting a wire for beading between the rows.  

Tightening of the eye-sockets.  

Mark 2 points in the middle of the eye-sockets at the both sides of the nose bridge (in total there are 4 points). Make the tightenings – right-left upper points, then left-right lower points. Repeat 2-3 times, you should get the nose bridge. Fasten off and cut a thread.  

Sewing of the ears  

The ears should be sewn for two rows upper than a fold, approx. in the area of the 28th row. The edges of the ears are placed along the edges of a fold.  

It is necessary to tighten the toes on the legs  

Making the eyes and nose  

For the eyes I use a polymer clay Sonnet (you can use any you like) of white and black colors.  

For the eyes  

Cut a piece of white polymer clay and make a ball approx. 1.5 cm in diameter.  

Cut it in half with a penknife, slightly smooth a semicircle so as it will be not very prominent. Mark the places for the eyes with a dots. I make two balls 0.3 mm in diameter from a black polymer clay and insert them in the marked places, slightly smooth the pupils so as they will not be upper than the eyes themselves  

For the nose  

Cut a piece of black polymer clay, make a ball 1.5 cm in diameter. You should give to a ball a shape of the nose. Make a small groove in the middle with a riding-crop not reaching the top approx. for a half. Make two cavities for the nostrils with a dots. And from the nostrils make the grooves with a riding-crop till the bottom of the nose. You can make the top of the nose textured with a dots.  

It is necessary to bake in an oven with a temperature 130 degrees for 30 minutes. After the nose completely dries it is necessary to cover it with a glossy varnish for a polymer clay. I use a varnish Sonnet for polymer clay.  

Then glue the eyes and nose, put on a collar and your Doberman is ready!!! 

error: Content is protected !!