Winter Doll Amigurumi Free Pattern

I continue to share amigurumi free patterns with you. In this article, winter doll amigurumi free pattern is waiting for you.

Tools and materials: 

With the materials used, the pupa is approximately 26 cm tall. The pupa is framed (arms and legs bend), it stands on its own. 

1) Pekhorka yarn “Children’s cotton”, color 01-White, composition: 100% mercerized cotton, 330m/100gr (slippers, leggings, shorts, frill and pattern on the dress, snood, headband) 

2) Pekhorka yarn “Children’s cotton”, color 02-Black, composition: 100% mercerized cotton, 330m/100gr (eyelashes and eyebrows) 

3) Yarn Pekhorka “Children’s cotton”, Color 03-Light beige, composition: 100% mercerized cotton, 330m/100gr (body) 

4) Yarn Pekhorka “Children’s cotton”, color 393-St.morengo, composition: 100% mercerized cotton, 330m/100g (sole) 

5) Yarn Pekhorka “Cotton natural”, color 223-St. turquoise, composition: 100% cotton, 425m/100gr (frill on slippers, dress) 

6) Hook 1.4mm 

7) Plastic cover or thick cardboard (insole in the leg) 

8) Leatherboard or other thick cardboard (insole for slippers) 

9) Filler (holofiber or sintepukh) 

10) Markers – 3 pieces – 

11) Pliers and wire cutters 

12) Safety eyes or beads 

13) Medical tissue plaster or adhesive plaster (for fixing the ends of the wire) 

14) Doll tresses 

15) Tailor’s pins with a bead 

16) A long needle (I have 5.5 cm) for sewing on tress (it is more convenient to sew with such a needle) 

17) A piece of wire 35 cm long, d = 2 mm (frame for the body). We take the wire with a margin, then cut off the excess. I bought this wire from a hardware store. 

18) Two pieces of wire 11 cm long (for hands) 

19) Knitting needles 2 mm (2 pcs) 

20) Beads 5 mm, 4 mm and 3 mm for decorating dresses and slippers 

21) Button for decorating snood 

22) A piece of white tulle 1.3-1.5 long and 9 cm wide 

23) Weights for legs – for the stability of the toy. I use fishing weights. One weight weighs 7 grams. They need 10 pieces, 5 pieces in each leg. 

Abbreviations: 

sc – single crochet 

inc – increase (two columns in one loop) 

dec – decrease (two columns knitted together) 

dc – double crochet 

ch-chain 

sl-st – slip stitch 

knit – front loop (knitting needles) 

purl – purl loop (knitting needles) 

PATTERN

Hands (2 pcs.) 

We knit with beige yarn. 

We fill the handles with filler in the process of knitting. 

Row 1: 6 sc into magic ring (6) 

2 row: (1 sc, inc) * 3 (9) 

3 row: (2 sc, inc) * 3 (12) 

4 row: (3 sc, inc) * 3 (15) 

5-7 row (3 rows): no change (15) 

8 row: 1 sc, “Bump” *, 13 sc (15) 

*”Bump” is 4 dc from one bottom under one top. Turn the “bump” outward. 

9-10 row (2 rows): no change (15) 

11 row: (1 sc, dec) * 4, 3 sc (11) 

We take a piece of wire 11 cm long, bend the tip about 1 cm with pliers, fix it with adhesive plaster and insert the wire into the hand. 

Note: when you get to the 30th row, bend the wire about 1 cm and secure with adhesive tape. 

12-35 row (24 rows): no change (11) 

36 row: (1 sc, dec * 2) * 2.1 sc (7) 

Cut the thread, pull the hole, hide the thread. 

Legs 

We start knitting with beige yarn. 

1 row: We collect a chain of 7 ch. Next 2 sc in the sixth loop of the chain, 4 sc, 3 sc in the first loop. Now knit on the reverse side of the chain: 4 sc, 1 sc in the sixth loop, sl-st, 1 ch (14) 

2nd row: inc*2, 4 sc, inc*3, 4 sc, inc, sl-st, Bpp (20) 

Rnd 3: (inc, 1 sc)*2, 4 sc, (inc, 1 sc)*3, 4 sc, inc, 1 sc, sl-st, ch (26) 

4th row: (inc, 2 sc)*2, 4 sc, (inc, 2 sc)*3, 4 sc, inc, 2 sc, sl-st, ch (32) 

5th row: (inc, 3 sc)*2, 4 sc, (inc, 3 sc)*3, 4 sc, inc, 3 sc, sl-st, ch (38) 

6 row: (inc, 4 sc)*2, 4sc, (inc, 4 sc)*3, 4 sc, inc, 4 sc, sl-st (44) 

We cut the insole from a plastic cover (or thick cardboard) according to the shape of the foot. 

7 row: we knit for the back walls of the loops 44 sc (44) 

Next, knit as usual for both loops. 

8-11 row (4 rows): unchanged (4) 

We make an offset of 6 sc. 

12 row: 10 sc, (1 sc, dec) * 8, 10 sc (36) 

13 row: no change (36) 

We take a piece of wire 35 cm long, bend the tip as shown in the photo. 

(We take the wire with a margin, then you need to cut off the excess). 

We attach it to the insole with adhesive tape. 

We insert the insole into the Leg and continue to knit. 

We also put weights in the leg and do not forget to fill it with holofiber or sintepuh. 

14 row: 6 sc, dec * 12, 6 sc (24) 

15 row: no change (24) 

16 row: 6 sc, dec * 6, 6 sc (18) 

17-37 row (21 row): no change (18) 

38 row: 4 sc, then knit with white yarn – 14 sc (18) 

39 row: 5 sc, inc, 12 sc (19) 

40 row: unchanged (19) 

41 row: 6 sc, inc, 12 sc (20) 

42 row: unchanged (20) 

43 row: 7 sc, inc, 12 sc (21) 

First you need to tie the right leg, then the left. 

Right leg: 

44 row (half row): 11 sc (21) 

Cut the thread, then it must be hidden in the process of knitting. Leave the marker! 

Left leg: 

44 row: unchanged (21) 

45 row (half row): 3 sc (21) 

Do NOT cut the thread, but remove the marker. We continue to knit the body. 

Torso 

We collect a chain of 5 air loops on the left leg and connect with the right leg. 

Next, we knit 10 sc on the right leg. 

Note: we reach the marker on the right leg and now the first row will begin here. 

Row 1: 52 sc (i.e. 11 sc in right leg, 5 sc in chain, 21 sc in left leg, 5 sc in chain, 10 sc in right leg) (52) 

2 row: 2 sc, inc, 25 sc, inc, 23 sc (54) 

3rd row: no change (54) 

4 row: 3 sc, inc, 26 sc, inc, 23 sc (56) 

We bend the wire as shown in the photo. We fix the ends with adhesive tape. 

5-13 row (9 rows): no change (56) 

14 row: (6 sc, dec) * 7 (49) 

15 row: 15 sc, then knit with beige yarn – 34 sc (49) 

16 row: (5 sc, dec) * 7 (42) 

17 row: (12 sc, dec) * 3 (39) 

18-31 row (14 rows): no change (39) 

32 row: (11 sc, dec) * 3 (36) 

33 row: no change (36) 

34 row: (4 sc, dec) * 6 (30) 

35 row: (3 sc, dec) * 6 (24) 

36 row: (2 sc, dec) * 6 (18) 

37 row: (1 sc, dec) * 6 (12) 

38-41 row (4 rows): no change (12) 

Stop at this point. Sew the arms to the body (see “tip” and photo above) and knit the dress. After you put the dress on the doll, we continue to knit the head. 

Tip: it is better to sew on the hands when you knit the dress at least up to the 9th row. Try on the dress on the doll and mark the exact place where to sew the arms. When the dress sits neatly. 

The dress 

We knit with turquoise yarn. We collect a chain of 22 ch and close it in a ring. 

Note: 

1) in the first row, the “increase” is {(1dc, 1 t, 1dc) in one loop] 

2) starting from the second row “increase” is 2 dc in the loop of the previous row 

3) when counting the loops “2 ch”, we also count at the table. 

4) from the 2nd to the 6th row, I highlighted the repeating “pattern” in red for convenience 

Row 1: 2 dc, 2 dc, inc, 3 dc, inc, 6 dc, inc, 3 dc, inc, 3 dc, sl-st (26) 

2 row: 2 dc, 2 dc, inc, 1 ch, inc, 3 dc, inc, 1 ch, inc, 6 dc, inc, 1 ch, inc, 3 dc, inc, 1 ch, inc, 3 dc, sl -st (34) 

3rd row: 2 dc, 3 dc, inc, 1 ch, inc, 5 dc, inc, 1 ch, inc, 4 dc, inc, 3 dc, inc, 1 ch, inc, 5 dc, inc, 1 ch, inc , 4 dc, sl-st (43) 

4th row: 2 dc, 4 dc, inc, 1 ch, inc, 7 dc, inc, 1 ch, inc, 11 dc, inc, 1 ch, inc, 7 dc, inc, 1 ch, inc, 5 dc, sl -st(51) 

5 row: 2 dc, 5 dc, inc, 1 ch, inc, 9 dc, inc, 1 ch, inc, 13 dc, inc, 1 ch, inc, 9 dc, inc, 1 ch, inc, 6 dc, sl -st (59) 

6 row: 2 dc, 6 dc, inc, 1 ch, inc, 11 dc, inc, 1 ch, inc, 15 dc, inc, 1 ch, inc, 11 dc, inc, 1 ch, inc, 7 dc, sl -st (67) 

7 row: 2 dc, 8 dc, skip 15 dc with chain stitches (sleeve), 19 dc, skip 15 dc with chain stitches (sleeve), 9 dc, sl-st (37) 

8 row: 2 dc, 8 dc, inc, 18 dc, inc, 8 dc, sl-st (39) 

9 row: 2 dc, 9 dc, inc, 19 dc, inc, 8 dc, sl-st (41) 

10-11 row (2 rows) – 2 dc, 40 dc, sl-st (41) 

12 row: 2 dc, 1 dc in the same loop, inc * 40, sl-st (82) 

13 row: 2 dc, 81 dc, sl-st (82) 

14 row: 2 dc, (inc, 1 dc) * 40, inc, sl-st (123) 

15-27 row (13 rows): 2 dc, 122 dc, sl-st (123) 

Next, we make a frill with white yarn along the bottom of the dress with the following pattern: (1 sc, 3 dc in one loop, 1 sc) * 41 

Cut the threads and hide. 

Sleeves 

1-9 row (9 rows): 20 dc (20) 

The last 10th row is best done directly on the doll. 

10 row: (8 dc, dec) * 2 (18) 

Cut the threads and hide. 

We embroider patterns on the dress with white yarn in 4 threads using the “back needle” method. 

We start with Figure NNo 1 (see diagram on the next page) in the middle of the dress, embroidering each curl separately. 

Moving to the right from Figure NNo 1, we embroider all the patterns according to the principle of Figure NNo 2 to the middle of the dress on the back. 

Moving to the left from Figure NNo 1, we embroider all the patterns according to the principle of Figure NNo 3 to the middle of the dress on the back. 

If there is an empty space on the back of the dress, you can embroider an additional curl. 

We embroider SNOWFLAKES. 

We also sew the belt with white yarn. 

The dress is almost ready! It looks like this from the front. 

This is what the dress looks like from the back. 

Sew on beads. I sewed beads with a diameter of 4 and 5 mm. 

We take a piece of tulle, make an assembly and sew it to the dress. 

Now the dress is complete! We put it on the doll and continue to knit the head. 

42 row: inc * 12 (24) 

43 row: (3 sc, inc) * 6 (30) 

44 row: (4 sc, inc) * 6 (36) 

The wire should reach approximately the middle of the head. 

Cut off the excess wire, bend the ends. Secure the ends of the wire with adhesive tape. 

45 row: (5 sc, inc) * 6 (42) 

46 row: (6 sc, inc) * 6 (48) 

47 row: (7 sc, inc) * 6 (54) 

48 row: (8 sc, inc) * 6 (60) 

49 row: (9 sc, inc) * 6 (66) 

50-55 row (6 rows): no change (66) 

56 row: in this row we will have eyes. If you sew on beads, then we knit this row without changes. 

If you insert safe eyes, then we knit like this: 

6 sc, 1 ch, skip 1 st, 5 sc, 1 ch, skip 1 st, 53 sc (66) 

57-60 row (4 rows): unchanged (66) 

61 row: (9 sc, dec) * 6 (60) 

62 row: (8 sc, dec) * 6 (54) 

63 row: (7 sc, dec) * 6 (48) 

We insert safe eyes, but do not tighten it too much, since you need to embroider eyelashes and eyebrows. I embroidered with black yarn in 2 strands. 

64 row: (6 sc, dec) * 6 (42) 

65 row: (5 sc, dec) * 6 (36) 

66 row: (4 sc, dec) * 6 (30) 

67 row: (3 sc, dec) * 6 (24) 

68 row: (2 sc, dec) * 6 (18) 

69 row: (1 sc, dec) * 6 (12) 

70 row: dec * 6 (6) 

Cut the thread, pull the hole and hide the thread. 

Slippers 

In total, you need to knit 4 parts (for each slipper, 2 parts). 

They need to be connected to each other in order to insert leatherboard (or other thick cardboard) between them for the stability of the toy. 

Note: tied the first part – cut the thread. Then we knit the second part, but we do not cut the thread, but connect it with the first part with connecting posts. When the parts are connected, cut off the thread, but it is better to hide it at the end of knitting a slipper. We begin to knit the sole with gray yarn. 

1 row: We collect a chain of 7 ch. Next 2 sc in the sixth loop of the chain, 4 sc, 3 sc in the first loop. Now knit on the reverse side of the chain: 4 sc, 1 sc in the sixth loop, sl-st, ch (14) 

2nd row: inc*2, 4 sc, inc*3, 4 sc, inc, sl-st, ch (20) 

Rnd 3: (inc, 1 sc)*2, 4 sc, (inc, 1 sc)*3, 4 sc, inc, 1 sc, sl-st, ch (26) 

4th row: (inc, 2 sc)*2, 4 sc, (inc, 2 sc)*3, 4 sc, inc, 2 sc, sl-st, ch (32) 

5th row: (inc, 3 sc)*2, 4 sc, (inc, 3 sc)*3, 4 sc, inc, 3 sc, sl-st, ch (38) 

6 row: (inc, 4 sc)*2, 4 sc, (inc, 4 sc)*3, 4 sc, inc, 4 sc, sl-st, ch (44) 

7 row: (inc, 5 sc)*2, 4 sc, (inc, 5 sc)*3, 4 sc, inc, 5 sc, sl-st (50) 

Cut out the insole according to the shape of the sole from leather cardboard (or other thick cardboard). We knit such 2 parts, as I wrote earlier, and connect them to each other with connecting posts. Should be 50 sl-st. We count 7 loops from the marker as shown in the photo. 

In this loop, the 1st row will begin, which we will knit with a white thread. 

Row 1: Attach the white thread to the front walls of these connecting posts and knit 50 sc (50) 

2-8 row (7 rows): no change (50) 

9 row: 16 sc, (1 sc, dec) * 8, 10 sc (42) 

10 row: no change (42) 

Next, knit in turquoise. 

11 row: 20 sc, dec * 4, 14 sc (38) 

12 row (semi-row): dec * 2, and make one more decrease with a half-column without a crochet (35) 

Cut the thread, hide. At the sole, also hide the thread. 

We decorate slippers with beads (I decorated with beads with a diameter of 3 mm). 

Tip: to make it easier to put slippers on the leg, you need to attach markers on three sides of the slipper (one on the back and two on the sides in front) 

and quietly put on slippers on the knife. 

For another slipper, repeat all the steps in the same way. 

bezel 

We knit with white yarn. 

We collect a chain of 8 loops on the knitting needles and knit with an elastic band 1 * 1. 

There should be 84 rows in total. Sew the ends of the rim and decorate with beads 

(I decorated with beads with a diameter of 4 mm). 

We put on the doll’s head. 

Gaiters (2 pcs.) 

We knit with white yarn. We collect a chain of 17 loops on the knitting needles and knit with the following pattern: 

1 row: 1 cr, 3 purl, 3 knit, 3 purl, 3 knit, 3 purl, 1 cr. 

2 row: 1 cr, 3 knit, 3 purl, 3 knit, 3 purl, 3 knit, 1 cr. 

In total, you need to knit 52 rows. Cut the thread and hide. 

Snood 

We knit with white yarn. We collect a chain of 20 loops on the knitting needles and knit with the following pattern: 

1 row: 1 cr, 3 purl, 3 knit, 3 purl, 3 knit, 3 purl, 3 knit, 1 cr. 

2 row: 1 cr, 3 knit, 3 purl, 3 knit, 3 purl, 3 knit, 3 purl, 1 cr. 

In total, you need to knit 80 rows. Cut the thread and hide. We decorate the snood with a button and sew it to the chrysalis. 

Tress 

Cut a piece of about 6-7 cm from the tress and make a bundle out of it (twist and sew). We will then attach it to the crown. 

Tip: wefts are easier to sew on with a long needle, I have a 5.5 cm long needle. Sew on wefts with a thread of the color from which they are sewn – then the thread will not be noticeable on the head. 

We sew the wefts in a spiral. To accurately calculate whether there is enough tress, you need to secure them with pins all over the head. 

At the end, at the crown, there should be a small hole for fixing a bunch of hair into it. 

We remove the pins, leaving the first row, and sew with a “back needle” seam. We sew the wefts tightly to each other so that there is no gap. Then we take our bundle and sew it in the center of the crown (or you can glue it). Next, we distribute the hair from the bundle over the entire head, put the cotton fabric on the head and iron the top of the head with an iron for a few seconds. Do not use a very hot iron, otherwise the wefts may deteriorate. 

Our doll is ready! 

error: Content is protected !!