Monkey Elvis Amigurumi Free Pattern
Monkey elvis amigurumi free pattern is waiting for you in this article. You can find Amigurumi free patterns on our website.
ABBREVIATIONS:
•Mr: Magic ring,
• sc: single crochet,
•İnc: increase,
•DEC decrease,
• x: repeat.
•BLO: Back Loop only,
•FLO: Front Loop only,
•DC: Double crochet.
MATERIALS:
For Elvis-textured yarn Grass (180m / 100gr) – 1 pail, acrylic 300m / 100gr.
hook 2mm; 3mm stocking knitting needles. filler (synthetic winterizer or holofiber), two beads or
half beads, or eyes.
When using the same materials as my toy size 30cm.
PATTERN
HEAD
1.) Draw 12 loops on the knitting needles, distributing 4 loops on each knitting needle.
2.) (1knit, inc) × 6 times = 18 – the increase is made from one loop
3.) (2knit, inc) × 6 times = 24
4.) = 24
5.) (3knit, inc) × 6 times = 30
6.) (4knit, inc) × 6 times = 36
7.) = 36
8.) (5knit, inc) × 6 times = 42
9.) (6knit, inc) × 6 times = 48
10.) = 48
11.)9knit, 6inc, 18knit, 6inc, 9knit = 60
12 and 13.) = 60
14.)12knit, 6inc, 24knit, 6inc, 12knit = 72
15.) = 72
16.) 12knit, dec, 2knit, 2 dec, 2knit, dec, 24knit, dec, 2knit, 2 dec, 2knit, dec, 12knit = 64
17 and 18.) = 64
19.)14knit, 2dec, 28knit, 2dec, 14knit = 60
20.) (8knit, dec) × 6 times = 54
21.) 54knit
22.) (7knit, dec) × 6 times = 48 (mark the 24th and 25th loop with a marker)
23-25.) = 48
26.) (6knit, dec) × 6 times = 42
27.) = 42
28.) (5knit, dec) × 6 times = 36
29.) = 36knit
30.) (4knit, dec) × 6 times = 30
31.) (3knit, dec) × 6 times = 24
32.) (2knit, dec) × 6 times = 18
33.) (1knit, dec) × 6 times = 12
34.) 6 dec, tighten the loops, cut the thread and hide it.
Fill the part through the bottom hole.
Muzzle
We knit with acrylic 300m / 100gr
1.)2ch, into the second loop from the 6sc hook
2.)inc x6 times = 12
3.) (1sc, inc) x6 times = 18 + 1sc bias
4.) (2sc, inc) x6 times = 24 + 1sc bias
5.) (3sc, inc) x6 times = 30 + 1sc bias
6.) (4sc, inc) x6 times = 36 + 1sc bias
7.) (5sc, inc) x6 times = 42 + 1sc bias
8.) (6sc, inc) x6 times = 48 + 1sc bias
9-16.) = 48
17.) (6sc, dec) x6 times = 42
18.) = 42
19.) (5sc, dec) x6 times = 36 1ch, rotation
20.) = 17sc, for the rear half-loop, 1ch, rotation
21.) = 17sc, 1ch, rotation
22.) = 17sc, 1ch, rotation
23.)dec, 13sc, dec = 15 1ch, rotation
24.)dec, 11sc, dec = 13 1ch, rotation
25.)dec, 9sc, dec = 11 1ch, turn
26.)dec, 7sc, dec = 9 finish knitting, leave the thread for sewing the muzzle
Fold the detail in half, as in the photo.
Take the thread in tone and stitch the upper lip (fold), as shown in the photo. Only need to sew up the blue
pins, these are the edges of the upper lip.
Underlip:
Dial a chain of 3ch; in the third loop from the hook, 3hdc do not short-circuit
2.)1hdc, inc, 1hdc = 4 2ch, turn
3.)inc dc.x4 time = 8 2ch, turn
4.) (1dc, inc .dc) x4 times = 12. finish, leave the thread for sewing
Nostrils
The photo shows where the center is and where you need to tie out the nostrils
1.) dial directly on the muzzle 3sc, from one loop -1ch, turn
2.)1sc, inc, 1sc = 4
3.) = 4sc, finish, leave the thread for sewing
The second nostril is connected in the same way. Next, you need to grab the nostrils by the corners. Then sew the muzzle to
to the head, aligning the middle of the muzzle (upper part) with the head marker. Leave a small hole
in order to fill the filler.
Ears (2pcs)
Dial a chain of 3ch, into the third loop from hook 8 sc, ch-turn
2-3.) rows = 8 sc.
Tie with a walk with a crustacean, sew to the head.
Head assembly:
Make tinting on the face, glue eyes, embroider eyelids and eyebrows. And the little head is ready !!!
Palm finger (2pcs)
2ch, into the second loop from the 6sc hook
2.)inc x6 times = 12
3-4.) = 12sc
Left hand
1.)7 ch., 1 sc in the second loop from the hook, 4st, 3st in one loop,
further along the other side of the chain 4 sc, inc = 14
2.)inc, 4sc, 3inc, 4sc, 2inc = 20
3.) = 20
4.)inc, 8 sc, 2inc, 8 sc, inc = 24
5.) inc, 10sc, 2inc, 10sc, inc = 28
6.) inc, 12csc, 2inc, 12sc, inc = 32
7-9.) = 32sc (I needed an offset loop here)
10.)4sc (finger and palm at the same time), then palm 28sc = 32
11.) (dec, 4sc, dec) – knit on the finger, 28sc (on the palm) = 34
12.) (4sc, dec) × 5 times, 4sc = 29
13.)15sc, dec, 12sc = 28
14.) (5sc, dec) × 4 times = 24 + 2st offsets
15.) (2sc, dec) × 6 times = 18
16.) change the thread and go to 3 knitting needles, distribute loops of 6 loops each = 18
17.) (4knit, dec) × 3 times (15)
We do not fill the hand tightly, so that in the future it will be easy to make tightenings.
Next, continue to add filler as you knit.
Knit directly 11cm (I have 40 rows), then make a decrease –
(dec x7 times), 1sc = 8
Hinges to collect on a thread and tighten, cut and hide.
It is visible that she inserted a wire and a button (for fastening).
Right hand
1.)7 ch., 1 sc into the second loop from the hook, 4 sc, 3 cst into one loop, then along the other
side of the chain 4 sc, inc = 14
2.)inc, 4 sc, 3inc, 4 sc, 2inc = 20
3.) = 20
4.)inc, 8sc, 2inc, 8 sc, inc = 24
5.)inc, 10 sc, 2inc, 10 sc, inc = 28
6.)inc, 12 sc, 2inc, 12 sc, inc = 32
7-9.) = 32
10.) 13 sc on the palm, 4sc, introducing the hook at the same time into the loop of the finger and loop
palm, 15sc palm = 32
11.) 13 sc on the palm, then knit only on the finger: dec, 4 sc, dec Further on the palm 15 sc = 34
12.) (4 sc, dec) × 5 times, 4sc = 29
13.)27 sc, dec = 28
14.) (5 sc, dec) × 4 times = 24 +2 sc offsets
15.) (2 sc, dec) × 6 times = 18
16.) change the thread and go to 3 knitting needles, distribute loops of 6 loops each = 18
17.) (4 knit, dec) × 3 times = 15
Next we knit like a left knob.
Hand tightening
Mark the points — the places of the weights on the palm and the back. Insert the needle at the lower point of the palm and withdraw into top. Pull back by sweeping nearby through 1 row. Pull the thread, tighten the knot. Reinsert the needle into
the upper point, the thread at the same time around the tip of the paw. Withdraw the needle at a point in the palm of your hand, fasten
knot. Hide the ends of the thread inside the paws.
Also do a second stretch.
Torso
1.) dial 12 loops, distribute into 3 stocking knitting needles and knit in a circle.
2.) knit from each loop 2.) loops = 24knit
3.) (2knit, inc) × 8 times = 32
4.) (3knit, inc) × 8 times = 40
5.) (19knit, inc) × 2 times = 42
6.) (6knit, inc) × 6 times = 48
7.) (7knit, inc) × 6 times = 54
8.) (8knit, inc) × 6 times = 60
9-19 = 60 (11 rows)
20.) (8knit, dec) × 6 times = 54
21.) = 54
22.) (7knit, dec) × 6 times = 48
23-24.) = 48knit
25.) 12knit, dec, 2knit, dec, 2knit, dec, 4knit, dec, 2knit, dec, 2knit, dec, 12knit = 42
26.) 13knit, (dec × 8 times), 13knit = 34
27.) = 34knit
28.)1knit, dec, 8 knit, dec x6 times, 8knit, dec, 1knit = 26
29.) 9knit, dec, 4knit, dec, 9knit = 24
30-37 = 24 (8 rows)
38.) (2knit, dec) × 6 times = 18
39.) (1knit, dec) × 6 times = 12
40.) 6 dec = 6 the remaining loops to collect on the thread, pull. Fill the part with a synthetic winterizer, through the bottom
hole. Fill it tight enough, but not to a stone state, then sew a hole.
Toe (2pcs)
2ch, into the second loop from the 6sc hook
2.)inc x6 times = 12
3-4.) 12sc
Foot (2pcs)
1.)7 ch., 1 st in the second loop from the hook, 4sc, 3sc in one loop, then on the other side of the chain 4 sc, inc = 14
2.)inc, 4sc, 3inc, 4sc, 2inc = 20
3.) = 20sc
4.)inc, 8sc, 2inc, 8sc, inc = 24
5.) inc, 10sc, 2inc, 10sc, inc = 28
6.)inc, 12sc, 2inc, 12sc, inc = 32
7-11.) = 32 sc
12.)4sc, finger + foot, then foot 28sc = 32
13.)finger: dec, 4sc, dec further on the foot: 28sc = 34
14.)3dec, 13sc, dec, 13sc = 30
15.) = 30
16.) (3sc, dec) × 6 times = 24
17.) = 24
18.) inc, 1sc, inc, 21sc = 26
19-20 = 26 to fill the part is not very tight
21.) dec, 1sc, dec, 21sc = 24
22.) (2sc, dec) x6 times = 18
23.) (1sc, dec) x6 times = 12
24.) dec x6 times = 6 add stuffing, stitch loops, hide thread
Make foot weights
Leg
(2 pcs)
1.)Tap on hosiery needles with acrylic thread = 20 knit
2.)20knit. – change the thread to textured
Next, we knit directly with a textured thread, we stuff it with a filler as it knits 12 cm (I have 50 rows), then
make reductions
1 .8knit, dec, 8knit, dec = 18
2.) (1knit, dec) x6 times = 12
3.) dec x6 times = 6
Sew a foot to the foot
Assembly.
Sew the head to the torso.
Hands, feet – thread mount. You can also tie the tail by typing 12 loops on the knitting needles and knit
to the desired length, filling with a pad as you knit.
If desired, you can make tinting on the palms and feet, highlight fingers and heels.
Well, the monkey is ready!
